after i applied the fix for the IPv6 that youu sent me, i was able to to keep IPv6 enabled on my computers, but more importantly my problem of obtaining a lic from server when the client was on the server as well, disaperraed... so i hit two birds in one stone..
thanks a bunch..
hmm.. i'll keep this in mind.
currrently i do not plan on puting the Lic Manager on our MS server 2003, i am sticking with win7 for now.
thanks for the heds up
I installed Infrastructure Design Suite but got same problem with fawzi, I already uncheck IPV 6 but doesn't work, attached log file for your check.
I didn't find any problem in the debug log. it looks good. Can you give me the server status to check? did you get -15 error on the client?
Welcome to the community!
First, verify from the client that you can PING the server PC-10562 and get the expected IPv4 address.
If it is not an IPv4 address in the xxx.xxx.xxx.xxx format, but rather an IPv6 in a larger hex format, then you need to modify your hosts file to point the DNS name of the server PC-10562 to its correct IPv4 address on each client that accesses it.
For more information about Network License Manager connectivity issues and IPv6, please see my discussion post here:
Then using Internet Explorer (not a 3rd party browser) from the client verify that ports 27000 (lmgrd.exe) and 2080 (adskflex.exe) are open in the firewall on the server:
Each should respond with a jargon page on verification. You should get a response similar to this:
If you get a 'Page cannot be displayed' or other 404 Error, then you have a port being blocked.
If you have any additional issues, please post them here.
You can use WiFi but you might need to increase the FLEXLM_TIMEOUT system environment variables of your clients as the thruput latency might be slower and cause connectivity timeouts.
Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register
Start with some of our most frequented solutions to get help installing your software.