InfraWorks General

Reply
Active Member
Posts: 7
Registered: ‎01-27-2010
Message 1 of 4 (675 Views)
Accepted Solution

AIM 2013 R2 - No "Show Motion Panel" button in tool strip?

675 Views, 3 Replies
10-26-2012 08:10 AM

After installing AIM 2013 R2, the tool tip no longer includes the "Show Motion Panel" button. Is this normal? If so, how do you specify a camera path? If not, how do I get it back?

MattD@...(NNTP handle: Matt Dillon)
You may recognize me from the
thousands of previous newsreader posts
I've made over the last 10+ years
as Matt Dillon

*Expert Elite*
TRogers
Posts: 1,133
Registered: ‎09-05-2007
Message 2 of 4 (672 Views)

Re: AIM 2013 R2 - No "Show Motion Panel" button in tool strip?

10-26-2012 09:25 AM in reply to: MattD

The ShowMotion panel is gone.  It is now creating a Storyboard.  It will take you a bit to get used to it, but it's actually pretty cool once you get the hang of it.  You can check out what it does in my blog...

 

http://civil3dj.wordpress.com/2012/10/22/see-the-result-of-autodesk-infrastructure-modeler-2013-r2/

If the issue was resolved by this method, please click on "Accept As Solution"
*Civil 3DJ*
Todd Rogers

Visit my blog here.

     
Active Member
Posts: 7
Registered: ‎01-27-2010
Message 3 of 4 (670 Views)

Re: AIM 2013 R2 - No "Show Motion Panel" button in tool strip?

10-26-2012 09:32 AM in reply to: TRogers

Ahhh.. got it... very showcase-esque ;-)

 

Many thanks.

MattD@...(NNTP handle: Matt Dillon)
You may recognize me from the
thousands of previous newsreader posts
I've made over the last 10+ years
as Matt Dillon

*Expert Elite*
TRogers
Posts: 1,133
Registered: ‎09-05-2007
Message 4 of 4 (665 Views)

Re: AIM 2013 R2 - No "Show Motion Panel" button in tool strip?

10-26-2012 09:34 AM in reply to: MattD

Exactly!!

If the issue was resolved by this method, please click on "Accept As Solution"
*Civil 3DJ*
Todd Rogers

Visit my blog here.

     

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community