InfraWorks General Discussion

Active Contributor
Posts: 49
Registered: ‎11-13-2006
Message 1 of 3 (592 Views)

Trying to create a new road style to look like a fence.

592 Views, 2 Replies
04-11-2012 08:18 AM

I'm trying to create a workaround since there is no current way of modeling a fence. (if you try to create a fence around a backyard it acts like it is a closed object and adds a roof.) So one thought was to create a new road style that looks like a fence. Issue is that we can create a Median that has height and width similar to a fence but when we apply the materials to the three sides, inner surface, outer surface and top surface it appears to use the TOP and inner but treats the outer as transparent.  So when you drop this into the model what you get is a fence that looks lke a fence on one side but on the other it is transparent so you see right through it.


Bill Neuhauser 

Posts: 87
Registered: ‎01-04-2011
Message 2 of 3 (578 Views)

Re: Trying to create a new road style to look like a fence.

04-16-2012 01:29 AM in reply to: bneuhauser

I think a "Barrier" is what you want to use instead...

Posts: 18
Registered: ‎12-11-2012
Message 3 of 3 (423 Views)

Re: Trying to create a new road style to look like a fence.

01-02-2013 01:22 PM in reply to: bneuhauser

I've attached a 3D modeled fence (no material to deal with)  Then i also attached the settings i used.  This seems to work pretty well.  Hope this helps

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community