desigining a gear

[mohammadmaaz2010]

hello

i actually wanted to design gears in autodesk fusion 360..is there any tutorial which can teach me how?

thank you

[innovatenate]

You could use a gear generator like the one below. Please note that the below link is not an Autodesk product. Autodesk Inventor has a design accelerator that can perform this task if you have access to it.

http://buildaweso.me/project/2013/12/6/interactive-gear-generator

Once you generate a SVG file with the generator. Create a design in Fusion 360, Create a Sketch, and use the Import SVG command from the Sketch pull down menu. Last, extrude the sketch into a spur gear.

See the below video for details.

https://screencast.autodesk.com/Main/Details/632031e1-f185-4684-9fe0-1ceb451089fa

Hope that helps.

Cheers,

[schneik-adsk · Accepted solution]

I uploaded a gear I made in Fusion 360 to the Gallery. Hope this helps!
https://fusion360.autodesk.com/projects/gear-template-inches

[mohammadmaaz2010]

thanks mate..it did help..but i would like to design more different types of gears..like bit of complex one..many gears attach to each other