Green Building Studio

Posts: 3
Registered: ‎06-24-2012
Message 1 of 1 (1,104 Views)

There is too much floor and ceiling area ...

1104 Views, 0 Replies
06-24-2012 12:35 PM

SO i'm getting this error. I'm not sure what to do. I've actually fixed the errors shown in the export menu. Can anyone help ?


Invalid gbXML file:
There is too much floor and ceiling area in the gbXML file received by Green Building Studio: Floor and ceiling area = 11,270 m2Building area = 6,621 m2The floor and ceiling area must be within 20% of the building area to perform meaningful energy analysis.
Note: Typically this problem occurs when room or space objects are not properly defined in your Revit model. Check that all interior volumes in your model contain room or space objects that are fully enclosed by floors, walls, roofs or other room bounding elements. See Using Green Building Studio with Revit Architecture and Revit MEP for helpful details on room and space objects. To inspect the analytical model of the gbXML file in Revit 2010, click Export > gbXML on the Revit application menu and explore the details tab.
Floor and ceiling area = 11,270 m2
Building area = 6,621 m2



You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Are you interested in helping shape the Autodesk Community?
We’re looking at a few different ways to improve the “All Forums” landing page and need your feedback! If interested, please take a few minutes to fill out the following Usability Study. Thank you for your time!

Ask the Community