Dynamic Blocks

Reply
Active Contributor
Posts: 32
Registered: ‎05-06-2008
Message 1 of 10 (404 Views)
Accepted Solution

array multiple objects sequentally

404 Views, 9 Replies
09-28-2012 07:40 AM

Greetings,

 

It seems like this should be easy but it's not. I have a block with multiple components. I want them to array sequentally as I drag the grip. First one component, then the next, then the next. What I get is all 3 at once when I drag the grip far enough. I tried 3 seperate linear parameters with their grips stacked but that didnt work either. What I have attached is a very simplified version of what I want, but I think once I get the concept it will be easy to elaborate on.

 

Thanks in advance,

 

Dave

Mentor
ojuris
Posts: 220
Registered: ‎06-08-2010
Message 2 of 10 (398 Views)

Re: array multiple objects sequentally

09-28-2012 08:31 AM in reply to: ddepriest

is it what you want?

 

Juris

Active Contributor
Posts: 32
Registered: ‎05-06-2008
Message 3 of 10 (392 Views)

Re: array multiple objects sequentally

09-28-2012 08:36 AM in reply to: ojuris

That is perfect. Thank you very much!

Mentor
ojuris
Posts: 220
Registered: ‎06-08-2010
Message 4 of 10 (390 Views)

Re: array multiple objects sequentally

09-28-2012 08:37 AM in reply to: ddepriest

You`re welcome

Distinguished Contributor
jz4all
Posts: 190
Registered: ‎02-24-2009
Message 5 of 10 (315 Views)

Re: array multiple objects sequentally

11-13-2012 01:54 AM in reply to: ojuris

Juris,

I would like to know how did you do it?

 

Thanks.

*Expert Elite*
Charles_Shade
Posts: 8,194
Registered: ‎04-10-2005
Message 6 of 10 (306 Views)

Re: array multiple objects sequentally

11-13-2012 05:01 AM in reply to: jz4all

Distance1 is the Parameter that Stretch, Stretch1, and Stretch2 are linked to.

Stretch controls the Distance4 Parameter that is chained to Distance1. Meaning that when Distance1 is activated the Action that is linked to Distance4 will also activate. Tha Arrays are linked to the relevant Parameters and logical distances were assigned. The circle needs to move 800 units to get to its first position, etc...

The rest of the Parameters and Actions are similarly setup.

 

(I just hope Juris had to trial and error this and did not just do it in one shot. I might have to not like that guy anymore if he did. :smileyvery-happy:)

Regards, Charles Shade            Win8 FAQ
CSHADEDESIGN|AUTOCAD LT|LT-KB|DYNAMIC BLOCKS

 
Please mark Accept as Solution if your question is answered. Kudos gladly accepted.
Active Contributor
Posts: 32
Registered: ‎05-06-2008
Message 7 of 10 (298 Views)

Re: array multiple objects sequentally

11-13-2012 06:32 AM in reply to: ddepriest

As a Post Script here is the block that I was actually working on. It took quite a bit of trial and error, and i still don't understand why the distance parameters have to be set to the lengths that they are.

Mentor
ojuris
Posts: 220
Registered: ‎06-08-2010
Message 8 of 10 (294 Views)

Re: array multiple objects sequentally

11-13-2012 06:48 AM in reply to: ddepriest

may be You can save to 2012 version?

In this moment I can`t have 2013 version

 

Regards

Juris

Active Contributor
Posts: 32
Registered: ‎05-06-2008
Message 9 of 10 (292 Views)

Re: array multiple objects sequentally

11-13-2012 06:50 AM in reply to: ojuris

Sure, no problem.

Distinguished Contributor
jz4all
Posts: 190
Registered: ‎02-24-2009
Message 10 of 10 (276 Views)

Re: array multiple objects sequentally

11-14-2012 02:57 AM in reply to: Charles_Shade

Thanks a lot Charles :catvery-happy:

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you interested in helping shape the Autodesk Community?
We’re looking at a few different ways to improve the “All Forums” landing page and need your feedback! If interested, please take a few minutes to fill out the following Usability Study. Thank you for your time!

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community