Dynamic Blocks

## Dynamic Blocks

Valued Contributor
Posts: 90
Registered: ‎08-29-2012
Message 1 of 8 (217 Views)

# Help with arraying dnamic block

217 Views, 7 Replies
12-14-2012 05:55 AM

I'm using a 2-2D recangles that are 5'x16" and 10'x16" and I am trying to figure out how to array this in one direction, to the left, but have the array on 5' increments. Also, within each rectangle I am needing text to show which size it is.

e.g. If I drag the array to the left more than 10' but less than 15' it will apply 15'.

Thank you.

Please mark Accept as Solution if your question is answered. Kudos gladly accepted. ⇘
Please use plain text.
*Expert Elite*
Posts: 8,170
Registered: ‎04-10-2005
Message 2 of 8 (209 Views)

# Re: Help with arraying dnamic block

12-14-2012 07:56 AM in reply to: jarredmonday

Please post your starting Dynamic Block and not just the rectangles.

Regards, Charles Shade            Win8 FAQ

Please use plain text.
Valued Contributor
Posts: 90
Registered: ‎08-29-2012
Message 3 of 8 (205 Views)

# Re: Help with arraying dnamic block

12-14-2012 09:09 AM in reply to: jarredmonday

Okay, attached is the best I could come up with, but it is not doing everything I am wanting. The 5' peice should not always be visible the 10' peice should be visible at all times.

The 5' peice should only appear on 10' increments starting at 15'.   e.g. 15,25,35,45,55...etc and not appear on 10' increments starting at  10'.   e.g. 10,20,30,40,50...etc.

Please mark Accept as Solution if your question is answered. Kudos gladly accepted. ⇘
Please use plain text.
*Expert Elite*
Posts: 8,170
Registered: ‎04-10-2005
Message 4 of 8 (203 Views)

# Re: Help with arraying dnamic block

12-14-2012 09:14 AM in reply to: jarredmonday

So there should be a series of 10' pieces with only one 5' piece on the end?

Regards, Charles Shade            Win8 FAQ

Please use plain text.
Valued Contributor
Posts: 90
Registered: ‎08-29-2012
Message 5 of 8 (198 Views)

# Re: Help with arraying dnamic block

12-14-2012 09:49 AM in reply to: jarredmonday
Yes. I like your description better. Thanks.
Please mark Accept as Solution if your question is answered. Kudos gladly accepted. ⇘
Please use plain text.
*Expert Elite*
Posts: 8,170
Registered: ‎04-10-2005
Message 6 of 8 (194 Views)

# Re: Help with arraying dnamic block

12-14-2012 10:07 AM in reply to: jarredmonday

And the Dyn Blk?

Does it do what you need?

Regards, Charles Shade            Win8 FAQ

Please use plain text.
Valued Contributor
Posts: 90
Registered: ‎08-29-2012
Message 7 of 8 (191 Views)

# Re: Help with arraying dnamic block

12-14-2012 10:29 AM in reply to: Charles_Shade

The Dynamic block works great. Thanks a lot. I did, however add to it. I added a visibility set to show and hide the 5' section. Which just fine. See attached.

Please mark Accept as Solution if your question is answered. Kudos gladly accepted. ⇘
Please use plain text.
*Expert Elite*
Posts: 8,170
Registered: ‎04-10-2005
Message 8 of 8 (188 Views)

# Re: Help with arraying dnamic block

12-14-2012 10:32 AM in reply to: jarredmonday

Excellent

Regards, Charles Shade            Win8 FAQ

Please use plain text.

### You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

### Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Recently Solved