Dynamic Blocks

Reply
Contributor
Posts: 18
Registered: ‎05-25-2006
Message 1 of 7 (90 Views)

Dynamic elbow problem

90 Views, 6 Replies
03-01-2007 08:51 AM
Hi, i am going crazy with this one.

I trying to strech the diameter of my elbow, but the insulation line (in blue) and the center line (in red)
don't follow when i use the distance 1 parameter. Can someone help me out with that ??
Distinguished Contributor
Posts: 882
Registered: ‎12-12-2005
Message 2 of 7 (90 Views)

Re: Dynamic elbow problem

03-01-2007 12:02 PM in reply to: laelic
I no its a lil messy but hopefully will do the trick
Contributor
Posts: 18
Registered: ‎05-25-2006
Message 3 of 7 (90 Views)

Re: Dynamic elbow problem

03-01-2007 01:07 PM in reply to: laelic
Dosen't do the trick. One of the blue line is scale more than 3in. And the pipe line dosen't follow the angle. Any other suggestion ?
Distinguished Contributor
Posts: 882
Registered: ‎12-12-2005
Message 4 of 7 (90 Views)

Re: Dynamic elbow problem

03-01-2007 01:23 PM in reply to: laelic
If you changes the width before the overall size it works. I know its a pain lol. Forgot to turn a couple grips to sorry
New Member
Posts: 1
Registered: ‎05-30-2007
Message 5 of 7 (90 Views)

Re: Dynamic elbow problem

05-30-2007 07:15 AM in reply to: laelic
FROM BLOCK EDITOR YOU CAN USE OFFSET TO WHAT EVER WHAT YOU WANT.
Mentor
Posts: 699
Registered: ‎04-21-2006
Message 6 of 7 (90 Views)

Re: Dynamic elbow problem

02-22-2008 03:18 AM in reply to: laelic
You could always use the blocks from here:
http://www.3dcadmax.com/2DPipeFittingsAutoCAD.htm
Contributor
Posts: 15
Registered: ‎12-30-2007
Message 7 of 7 (90 Views)

Re: Dynamic elbow problem

03-13-2008 02:12 PM in reply to: laelic
Hi!
I've already created an dynamic elbow, it shows 90º and 45º from 3/8" to 30" in top and left views (front still needs some tuneup).

Have a peek inside the block and see if it helps.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you interested in helping shape the Autodesk Community?
We’re looking at a few different ways to improve the “All Forums” landing page and need your feedback! If interested, please take a few minutes to fill out the following Usability Study. Thank you for your time!

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community