Dynamic Blocks

Reply
Contributor
Chris
Posts: 16
Registered: ‎02-14-2012
Message 1 of 9 (480 Views)
Accepted Solution

Dynamic block with alternating objects

480 Views, 8 Replies
11-21-2013 12:19 PM

Hi, 

 

I'm currently creating blocks for our office library. One of these is a grille with some apposed blade dampers on it. I'm trying to set up an array that will duplicate the apposed blades as I change the length of the grille. However, it will only copy the blades in pairs, not singlely one after the other. Ie, the blades are 100mm apart, and in a / \ pattern meaning that each instance of / or \ 'should' duplicate every 200mm. Except when I lengthen the block by 200mm it won't duplicate untill I've gone double the distance (400) when it gives me both / and \. 

 

Does anybody know of any solutions? Or if it's possible?

Mentor
ojuris
Posts: 234
Registered: ‎06-08-2010
Message 2 of 9 (443 Views)

Re: Dynamic block with alternating objects

11-23-2013 05:54 AM in reply to: Chris
hi! Check this version Regards Juris
Contributor
Chris
Posts: 16
Registered: ‎02-14-2012
Message 3 of 9 (426 Views)

Re: Dynamic block with alternating objects

11-24-2013 12:34 PM in reply to: ojuris
Hi ojuris.

Please explain? I'm using autoCAD LT 2011 if that's what you mean?
Mentor
ojuris
Posts: 234
Registered: ‎06-08-2010
Message 4 of 9 (422 Views)

Re: Dynamic block with alternating objects

11-24-2013 12:40 PM in reply to: Chris
no, I don`t mean that I attach file, but where is it - i don`t know I`ll try to draw again ...
Mentor
ojuris
Posts: 234
Registered: ‎06-08-2010
Message 5 of 9 (414 Views)

Re: Dynamic block with alternating objects

11-24-2013 12:56 PM in reply to: Chris
try to attach new file
Mentor
ojuris
Posts: 234
Registered: ‎06-08-2010
Message 6 of 9 (409 Views)

Re: Dynamic block with alternating objects

11-24-2013 12:58 PM in reply to: ojuris
I can`t attach file
Contributor
Chris
Posts: 16
Registered: ‎02-14-2012
Message 7 of 9 (407 Views)

Re: Dynamic block with alternating objects

11-24-2013 12:59 PM in reply to: ojuris
So I see. Can you describe what you did?
Mentor
ojuris
Posts: 234
Registered: ‎06-08-2010
Message 8 of 9 (404 Views)

Re: Dynamic block with alternating objects

11-24-2013 01:01 PM in reply to: ojuris
Contributor
Chris
Posts: 16
Registered: ‎02-14-2012
Message 9 of 9 (392 Views)

Re: Dynamic block with alternating objects

11-24-2013 01:16 PM in reply to: ojuris
Thanks, that works.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community