Drafting Techniques

Reply
Member
mcisco2012
Posts: 4
Registered: ‎01-20-2012
Message 1 of 3 (266 Views)

Realworld Coordinates vs Plant or Arbitrary Coordinates

266 Views, 2 Replies
10-11-2012 10:40 AM

This is my first post in this discussion group. First I was wondering if there was a way to do a POLL and have users vote on a topic? Second I was wondering how most of you do your drawings (models). Specifically if you generally use Realworld coordinates, Plant coordinates, start at 0,0,0  or arbitrarily strat drawing where ever?

 

This is not ment as a judgement, just wondering how most companies operate.  I know that if a client has a plant coordinate system and requires the Engineering Company to use it, that is what we do, but if the client does not request a specific coordinate system what is your company's prefered technique?

 

Thanks

Mentor
DSM_dude
Posts: 174
Registered: ‎03-08-2011
Message 2 of 3 (257 Views)

Re: Realworld Coordinates vs Plant or Arbitrary Coordinates

10-11-2012 01:38 PM in reply to: mcisco2012

That soley depends on the type of drawing your working on.

 

All civil type drawings use real world coordinates.

 

Plant drawings use plant coordinates. They will specify thier own 0,0.

 

 

 

Cad Blog:
www.geaux-cad.blogspot.com
*Expert Elite*
JGerth
Posts: 1,832
Registered: ‎12-05-2005
Message 3 of 3 (241 Views)

Re: Realworld Coordinates vs Plant or Arbitrary Coordinates

10-15-2012 08:00 AM in reply to: mcisco2012

It's probably worth noting that any and all coordinate systems are arbitrary in nature, and none of them reflect the 'real world'.  After all, the real world is not a plane that can be described in terms of X, Y, & Z, nor is is a simple spere, rather it's a shape that AutoCAD products cannot accurately and correctly deal with.  If would be more honest for Civil3d and Map3D to be named Civil+z and Map+sorta-Z

 

There are, however, consensus coordinate systems - widely agreed upon and officially recognized that are the closest equivalent to a real worl system, and eminently appropriate for locating facilities in relation to each other and the remainder of the planet.

 

In the US, we generally utilize a State Plane Coordinate system - Florida for example, uses three different planes (North, East, and West) and the appropriate one to use depends on the location of the project.   other jurisdictions have equivalent systems. 

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community