Design Review

Reply
New Member
nzanbil
Posts: 1
Registered: ‎08-20-2009
Message 11 of 15 (1,520 Views)

Re: "There was a problem displaying the file"

08-20-2009 09:12 AM in reply to: noahma
I experienced this same issue when exporting files that were created in ShipConstructor 2008. A work around I've found is to explode the blocks, or referenced files, I tend to remove all the lines and polylines as well, although this might not be necessary. Good luck.
Active Contributor
wouterbleumink
Posts: 42
Registered: ‎08-19-2009
Message 12 of 15 (1,520 Views)

Re: "There was a problem displaying the file"

08-27-2009 12:40 AM in reply to: noahma
Anybody found a solution for this problem?

it is becomming really annoying not to be able to create a 3DDWF with realistic materials etc.

TIA

Wouter
Active Contributor
wouterbleumink
Posts: 42
Registered: ‎08-19-2009
Message 13 of 15 (1,520 Views)

Re: "There was a problem displaying the file"

11-04-2009 01:12 AM in reply to: noahma
Well,

I have been searching for a solution.... and i found a workaround.

If i create a section-line next to the model and set it up so it goes trough the entire model (so it actually does not create a section) and set the section-line to 'live section', i can export the model to a 3D-dwf and open it in DesignReview without problem's

Hope this help's others with the same problem...
Mentor
MaximUdod
Posts: 498
Registered: ‎01-14-2010
Message 14 of 15 (997 Views)

Re: "There was a problem displaying the file"

01-21-2013 08:11 AM in reply to: wouterbleumink

Just got this error on attempt to open in Design Review 2013 Unverferth Bearing Maintanance.ipb (from the sample projects pack) exported to DWF with Inventor Publisher 2013 SP3.

Mentor
MaximUdod
Posts: 498
Registered: ‎01-14-2010
Message 15 of 15 (870 Views)

Re: "There was a problem displaying the file"

02-15-2013 06:34 AM in reply to: MaximUdod

Nevermind - I can't reproduce the issue from the other PC

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community