Design Review

Reply
New Member
hrmfmdesign
Posts: 2
Registered: ‎05-04-2011
Message 1 of 5 (884 Views)
Accepted Solution

markups print wrong scale

884 Views, 4 Replies
05-04-2011 03:41 PM

I'm using Design Review 2012. I recently marked up a drawing that was sent to me as a pdf of a scanned drawing (i.e. all raster - no vector). When I went to print the pdf image had shrunken a lot, but the mark-up notes stayed full size and don't coincide. It looks fine on the screen. I have tried every print setting I can think of and nothing has fixed it. If I can't get it fixed I'll have to throw away this file and do all the mark-up in Acrobat. Anybody out there had this problem and figured out a solution?

Thanks

Contributor
pkimmons
Posts: 21
Registered: ‎06-02-2009
Message 2 of 5 (862 Views)

Re: markups print wrong scale

05-11-2011 02:02 PM in reply to: hrmfmdesign

We are having the same type thing....on our Windows 7 x64 computers, first, right clicking on the tif - open with - ADR doesn't work, we have to open the software first and drag the tif file over to ADR.

 

Then, markups are made and we try to print....we have the following issues:

 

1. only the bubbles and markups are shown, but not the drawing.

2. the bubbles are shown at the right location, however, the drawing is mini size in the upper left corner of the printed sheet.

 

This appears to be happening mostly on the 11x17 drawing but have had a few 8.5x11 drawings w/ the same issue.

Contributor
pkimmons
Posts: 21
Registered: ‎06-02-2009
Message 3 of 5 (854 Views)

Re: markups print wrong scale

05-12-2011 11:38 AM in reply to: pkimmons

Try this, go into the print options, Advanced Print Options, and click "Turn Data into a bitmap before printing" under "Pre-process Bitmaps"....this is a decent work around for the moment.

New Member
hrmfmdesign
Posts: 2
Registered: ‎05-04-2011
Message 4 of 5 (849 Views)

Re: markups print wrong scale

05-12-2011 03:12 PM in reply to: hrmfmdesign

Hey, thanks! That worked. It's a lot better than what I was doing: saving screen shots. I'm going to resist the urge to mark up pdfs in Design Review from now on. Hopefully I'll just get dwf files. I hope it fixed the other guy's problem, too.

New Member
RConger877
Posts: 1
Registered: ‎11-01-2011
Message 5 of 5 (585 Views)

Re: markups print wrong scale

11-01-2011 06:14 AM in reply to: hrmfmdesign

I am having the exact same problem. It appears that ADR changes the sheet size when you save the file. Is their a fix yet.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community