Design Review

Reply
Valued Contributor
DRudaz
Posts: 65
Registered: ‎04-19-2010
Message 1 of 4 (729 Views)

Design Review 2013 measure

729 Views, 3 Replies
01-24-2013 12:46 AM

Hi,

I have one question about Design Review 2013.

 

Why I can see the edges of the parts hidden when I want to take measures?

It becomes very difficult to make measurements in the case where several parts are hidden and they are one above the other.

 

Is it possible to ensure that the edges of hidden parts are not selectable, thank you

 

 

Regards

 

Dom

*Expert Elite*
pendean
Posts: 22,158
Registered: ‎11-06-2003
Message 2 of 4 (722 Views)

Re: Design Review 2013 measure

01-24-2013 04:57 AM in reply to: DRudaz

If they are visible, they are in the selection process: there doesn't appear to be an option to "turn it off" from what I can tell.

Dean Saadallah Blog | Facebook | Google+ | Twitter | PINS
Valued Contributor
DRudaz
Posts: 65
Registered: ‎04-19-2010
Message 3 of 4 (683 Views)

Re: Design Review 2013 measure

01-28-2013 08:09 AM in reply to: pendean

OK,

 

But the parts and edges are masked ?

I can take a mesure of invisible edge !!!

 

See picture.

 

Regards

 

Dom

*Expert Elite*
pendean
Posts: 22,158
Registered: ‎11-06-2003
Message 4 of 4 (674 Views)

Re: Design Review 2013 measure

01-28-2013 12:44 PM in reply to: DRudaz

I did not write the program, I just use it like you do and observed the same issue with no apparent fix.

Dean Saadallah Blog | Facebook | Google+ | Twitter | PINS
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.