DWG TrueView

Reply
Member
RikardStrand
Posts: 3
Registered: ‎05-22-2012
Message 11 of 13 (2,451 Views)

Re: TrueView 2013 deployment

05-22-2012 01:22 PM in reply to: mlabell

Hello,

 

Have any of you tried to do a silent installation (without modifying the MSI) to a different path (i.e. D:\Win32\Autodesk\.."?

 

Regards,

 

Rikard Strand

*Expert Elite*
GTVic
Posts: 906
Registered: ‎09-07-2004
Message 12 of 13 (1,997 Views)

Re: TrueView 2013 deployment

08-20-2012 02:09 PM in reply to: mlabell

For Design Review and DWG TrueView on Windows 7 64-bit.

 

Figuring out which runtime installs are required is frustrating for 2013. The following are all mentioned in this topic, various blogs, the setup.ini, etc.

 

Surely all of this is not required?

 

  • x86 Visual C++ Runtimes: 2005 SP1 ATL, 2008 SP1, 2010 SP1
  • x64 Visual C++ Runtimes: 2008 SP1, 2010 SP1
  • wmfdist64.exe, NetFx20.exe, msxml6_x64.msi
  • DirectX 9
  • DOTNET4;DOTNET4KB2468871

In the TrueView setup.ini the AOEM prerequisite is listed as:

PREREQUISITE=VCREDIST2008SP1X86;VCREDIST2008SP1X64;VCREDIST2010SP1X86;VCREDIST2010SP1X64;DOTNET20;DIRECTX;MSXML6;WMF95X64

which doesn't even mention .NET 4.0 which the readme specifically says is required including Update 1 being mandatory.

 

In the Design Review Installation guide it mentions VCC2010SP1x86 and .NET 4 but the ADR prerequisite in the TrueView setup.ini lists the following.

PREREQUISITE=VCREDIST2010SP1X86;DOTNET4;DOTNET4KB2468871

 

The main ones I would like to eliminate are:

2005 VC++, MSXML, .NET 2.0, WMFDIST

 

I think the reason why people are listing VCC 2005 is a prerequisite for their deployment system to work rather than for TV or ADR itself. Is that correct? I can't imagine why .NET 2.0 would be listed.

 

Thanks in advance.

Valued Contributor
skatterbrainz
Posts: 54
Registered: ‎07-21-2010
Message 13 of 13 (1,953 Views)

Re: TrueView 2013 deployment

08-26-2012 02:47 AM in reply to: RikardStrand

Did you try specifying INSTALLDIR=<path> ?  For example...

 

setup.exe /Q /W /I /v"INSTALLDIR=D:\TrueView2013"

 

or (possibly)...

 

setup.exe /Q /W /I setup.ini INSTALLDIR=D:\TrueView2013

-------------------------
Get the Visual LISP Developer's Bible 2011 Edition, and the AutoCAD Network Administrator's Bible 2012 Edition on Amazon Kindle

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community