DWF

Reply
Distinguished Contributor
Posts: 115
Registered: ‎09-19-2003
Message 1 of 4 (740 Views)

design review fails to open a previously saved dwf

740 Views, 3 Replies
12-12-2008 01:41 PM
I have a dwf file which was opened, marked up and previously saved. When trying to re-open this file the following error message occurs;
Your current version of Design Review does not support files of this type.
Has anyone had this happen before and if so, is there a fix?
*Dean Saadallah
Message 2 of 4 (740 Views)

Re: design review fails to open a previously saved dwf

12-15-2008 01:22 PM in reply to: huycke
What version DR do you have? The error message is very specific about the
failure... .

--
Dean Saadallah
http://LTisACAD.blogspot.com
--
Distinguished Contributor
Posts: 115
Registered: ‎09-19-2003
Message 3 of 4 (740 Views)

Re: design review fails to open a previously saved dwf

12-15-2008 01:37 PM in reply to: huycke
Design Review 2009 service pack 1 installed
New Member
Posts: 1
Registered: ‎10-30-2008
Message 4 of 4 (649 Views)

Re: design review fails to open a previously saved dwf

08-13-2012 09:00 AM in reply to: huycke

Tried to open a .dwf created in autodesk design review 2012 with autodesk design review 2013, but

it will not open in either version and gives the following error:  "Your current version of Design Review

does not support files of this type".  I tried changing filetype to .ZIP and open, but would not open. 

Any ideas on how to get this file open?  It opened fine for a week or so after it was created in ADR 2012,

but now will not open in ADR 2012 or 2013.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community