DWF6 - display of .tif images

BrianPickles · ‎10-14-2003

I'm using ADT3.3 +Raster design as a tool to archive old scanned drawings - have a problem displaying DWF6 in AEV.
Image format is binary .tif, I had no problems using old format .DWF - Now image displays lines & text as 'hollow' instead of solid black. see attached dwf file. anyone have any ideas ?

Report Inappropriate Content · 10-10-2003 02:04 AM in reply to: BrianPickles

There was no attachment.

If it is an Ascii DWF then you can send it to
href="mailto:Thomas@Bornhaupt.de">Thomas@Bornhaupt.de

regards

style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">

"BrianPickles" <
href="mailto:brian.pickles@surreycc.gov.uk">brian.pickles@surreycc.gov.uk>
schrieb im Newsbeitrag
href="news:f1921c5.-1@WebX.maYIadrTaRb">news:f1921c5.-1@WebX.maYIadrTaRb...
I'm
using ADT3.3 +Raster design as a tool to archive old scanned drawings - have a
problem displaying DWF6 in AEV.
Image format is binary .tif, I had no
problems using old format .DWF - Now image displays lines & text as
'hollow' instead of solid black. see attached dwf file. anyone have any ideas
?

Report Inappropriate Content · 10-10-2003 02:09 AM in reply to: BrianPickles

The attachment is there: are you accessing this through browser? I use OE,
it shows up fine.

--
Dean Saadallah
Add-on products for LT
http://www.pendean.com/lt
--

Report Inappropriate Content · 10-10-2003 07:22 AM in reply to: BrianPickles

You aren't alone, I have this with tiffs in dwfs also.

--
Regards,
Robin Capper
Email; robin.capper.design@xtra.co.nz or robin.capper@thewarehouse.co.nz

"Dean Saadallah" wrote in message
news:542053ABDD8037D2330128610A93847C@in.WebX.maYIadrTaRb...
> The attachment is there: are you accessing this through browser? I use OE,
> it shows up fine.
>
> --
> Dean Saadallah
> Add-on products for LT
> http://www.pendean.com/lt
> --
>
>

Report Inappropriate Content · 10-10-2003 06:55 PM in reply to: BrianPickles

Thats silly. I use OE6. I can see an attachment, but i could not extract it.
All buttons for this are gray.

"Dean Saadallah" schrieb im Newsbeitrag
news:542053ABDD8037D2330128610A93847C@in.WebX.maYIadrTaRb...
> The attachment is there: are you accessing this through browser? I use OE,
> it shows up fine.
>
> --
> Dean Saadallah
> Add-on products for LT
> http://www.pendean.com/lt
> --
>
>

Report Inappropriate Content · 10-10-2003 09:46 PM in reply to: BrianPickles

OE6 here too: I suspect you might have access to attachments turned off?
OE6>Tools>Options>Security Tab>Don't allow attachments..... .

--
Dean Saadallah
Add-on products for LT
http://www.pendean.com/lt
--

Report Inappropriate Content · 10-11-2003 01:09 AM in reply to: BrianPickles

my options from OE6 was not correct.

"Dean Saadallah" schrieb im Newsbeitrag
news:F48CB7D0AC57D774611668D8AC809BCB@in.WebX.maYIadrTaRb...
> OE6 here too: I suspect you might have access to attachments turned off?
> OE6>Tools>Options>Security Tab>Don't allow attachments..... .
>
> --
> Dean Saadallah
> Add-on products for LT
> http://www.pendean.com/lt
> --
>
>

Report Inappropriate Content · 10-11-2003 01:18 AM in reply to: BrianPickles

Hi,

AEV could read this DWF with no problem. But the Header
information of this file is not correct!

(DWF V06.00) has to be (W2D V06.00) look to the Whip6
SDK Doku.

VoloView shows 2 errors:

1) DWF file is newer...

2) Error regenerating graphic....

if you change with HexEdit to (W2D V06.00) then the first
error is gone. But then AEV says: " unknown error"

Have you an Ascii-Version of this file.

regards

Thomas

style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">

"BrianPickles" <
href="mailto:brian.pickles@surreycc.gov.uk">brian.pickles@surreycc.gov.uk>
schrieb im Newsbeitrag
href="news:f1921c5.-1@WebX.maYIadrTaRb">news:f1921c5.-1@WebX.maYIadrTaRb...
I'm
using ADT3.3 +Raster design as a tool to archive old scanned drawings - have a
problem displaying DWF6 in AEV.
Image format is binary .tif, I had no
problems using old format .DWF - Now image displays lines & text as
'hollow' instead of solid black. see attached dwf file. anyone have any ideas
?

BrianPickles · ‎10-14-2003

Hi all,

Thomas - Ascii version attached - looks even worse.

Robin - glad I'm not the only one with image problems.

Dean - could you see the scanned image in the DWF OK
are the lines/text 'hollow' when you zoom in

Report Inappropriate Content · 10-12-2003 09:54 PM in reply to: BrianPickles

Hi Brian,

the file is still zip-encoded. It is not a pure ASCII File. To
have a closer look to the file i need a unziped file.

Thomas

PS: tis is not a problem of ASCII or Unicode.

style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">

"BrianPickles" <
href="mailto:brian.pickles@surreycc.gov.uk">brian.pickles@surreycc.gov.uk>
schrieb im Newsbeitrag
href="news:f1921c5.7@WebX.maYIadrTaRb">news:f1921c5.7@WebX.maYIadrTaRb...
Hi
all,

Thomas - Ascii version attached - looks even worse.

Robin - glad I'm not the only one with image problems.

Dean - could you see the scanned image in the DWF OK

are the lines/text 'hollow' when
you zoom in

DWF

DWF6 - display of .tif images

Re: DWF6 - display of .tif images

Re:

Re:

Re:

Re:

Re:

Re: DWF6 - display of .tif images

Re:

Re: