Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
We are having a problem with Express viewer ver. 4.
A .dwf file generated using ACAD2000 displays with the correct paper size in AEV ver.3, but as a very small image in the middle of a very large sheet in ver.4. It is now impossible to print an A0 sheet using AEV ver. 4
We are using the standard DWF EPlot driver as delivered from Autodesk.
The problem occurs on all plotters/printers and on all paper sizes.
Opening the .dwf i AEV ver.4 shows a very very large paperspace (it looks like the size is in inches instead of mm). Opening the same .dwf in AEV ver. 3.1 works fine.
Similar problem like this are reported in other topics on this Discussion group.
We are having a problem with Express viewer ver. 4.
A .dwf file generated using ACAD2000 displays with the correct paper size
in AEV ver.3, but as a very small image in the middle of a very large sheet in
ver.4. It is now impossible to print an A0 sheet using AEV ver. 4
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")