Community Feedback

Reply
Distinguished Mentor
TrevN
Posts: 524
Registered: ‎04-14-2008
Message 1 of 15 (1,429 Views)
Accepted Solution

The New Board, Hmmm

1429 Views, 14 Replies
06-07-2010 03:06 AM

First impressions of the new forum, hmmm not overly impressed!

 

And how do you set your Author name back to how it was? Mine has changed!

*Expert Elite*
pendean
Posts: 20,283
Registered: ‎11-06-2003
Message 2 of 15 (1,414 Views)

Re: The New Board, Hmmm

06-07-2010 05:43 AM in reply to: TrevN

My Settings link, upper right side. Explore.

Dean Saadallah Blog | Facebook | Google+ | Twitter | PINS
Distinguished Mentor
TrevN
Posts: 524
Registered: ‎04-14-2008
Message 3 of 15 (1,407 Views)

Re: The New Board, Hmmm

06-07-2010 06:04 AM in reply to: pendean

Ahh yes, did all that, It's even got the correct name in there, but my name against post is still incorrect!

*Expert Elite*
pendean
Posts: 20,283
Registered: ‎11-06-2003
Message 4 of 15 (1,397 Views)

Re: The New Board, Hmmm

06-07-2010 06:20 AM in reply to: TrevN

To the left of each post? Not a user option to edit, never has been since way before the last change/ old system. Contact Eric Wright with Autodesk, the guy posting about the forums changes, he might be able to help.

Dean Saadallah Blog | Facebook | Google+ | Twitter | PINS
Distinguished Mentor
TrevN
Posts: 524
Registered: ‎04-14-2008
Message 5 of 15 (1,394 Views)

Re: The New Board, Hmmm

06-07-2010 06:24 AM in reply to: pendean

Yes, the name on the left.

 

This has changed from before the update, it should not read tnorman, it should, as it has always done read Trev N.

 

And yes, the last time they updated this forum, my name again changed but was easily put back, now I haven't a clue, hence I'm asking!

*Expert Elite*
pendean
Posts: 20,283
Registered: ‎11-06-2003
Message 6 of 15 (1,368 Views)

Re: The New Board, Hmmm

06-07-2010 07:10 AM in reply to: TrevN

Find Eric Wright's email address and contact him for help, if it can be done that's the one person to do it. Then share with the group your findings of course, I'm sure you are not the only one.

Dean Saadallah Blog | Facebook | Google+ | Twitter | PINS
Contributor
WorkerBeeatDDP
Posts: 21
Registered: ‎06-05-2010
Message 7 of 15 (1,356 Views)

Re: The New Board, Hmmm

06-07-2010 07:24 AM in reply to: TrevN

the name on the left is the one you used to create a login ID IIRC

Dave - DDP
Acad 2012 and Revit 2012
Win 7 Pro 64 bit
Intel I7-860 @2.8GHz
12GB DDR3 RAM
GeForce GTX260
Distinguished Mentor
TrevN
Posts: 524
Registered: ‎04-14-2008
Message 8 of 15 (1,350 Views)

Re: The New Board, Hmmm

06-07-2010 07:27 AM in reply to: TrevN

That may be so, but it's not the one I have used for the past few years as an identification on the forums.

 

Last week it was as I wanted it, since the update of the site it has changed.

Moderator
Posts: 547
Registered: ‎05-09-2008
Message 9 of 15 (1,318 Views)

Re: The New Board, Hmmm

06-07-2010 08:07 AM in reply to: TrevN

Trev,

 

You can change your login with the "EDIT ACCOUNT INFORMATION" link at the top right of any page just make the adjustments you want then enter your password and click "submit" at the bottom.

You will have to log out and back in with your new logon for this to take affect.

 

 

Discussion_Admin

Distinguished Mentor
TrevN
Posts: 524
Registered: ‎04-14-2008
Message 10 of 15 (1,296 Views)

Re: The New Board, Hmmm

06-07-2010 08:26 AM in reply to: Discussion_Admin

No, that didn't work either!

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community