Active Contributor
Posts: 27
Registered: ‎04-11-2010
Message 1 of 4 (237 Views)

Lessons For Preparing A 3D CAD Model for Inventor

237 Views, 3 Replies
05-07-2010 04:26 PM
I've been working with CAD Inventor software for several years and the first thing you need to do when preparing a CAD Model is to determine what type of units you need to design your 3D Model properly. After establishing whether you want to use Standard or Metric units you need to open a new part file. This is where you want to start before you begin to design assemblies. Inventor Assemblies are composed up of several parts that work together to create one design. We'll discuss these in further lessons.
After opening a new drawing the first and most important process to begin your 3D Model is to make all of your working planes visible. You can do this by opening the Origin File located on the left side of the screen in the Model Tree. The Model Tree is where all the processes throughout the design are listed in chronological order beginning with your first sketch.
After expanding the Origin file you can see the YZ, XZ, and XY Planes colored Grey because they are not visible yet. To make these working planes visible right click and select the option visibility. This will make the selected work plane visible and give you something to sketch on. The importance of this is that these planes can be used with several of the commands that allow you to design complex 3D Models.
These planes become extremely useful when trying to use commands like mirroring, revolving and so on. We'll discuss these commands later on in another lesson. Another advantage of having these planes visible allows you to sketch on any of them which becomes very helpful in a number of different situations when creating your 3D Model with CAD Inventor. Practice using these planes to sketch on and we'll discuss them in more detail later on in the lessons that follow. If you have any questions regarding 3D Planes for Inventions on CAD software please don't hesitate to ask. Thank you for your interest in learning CAD Inventor and visit our site daily for more Free Lessons on how to operate this wonderful software.
Visit For all your CAD related Resources
Thank You for choosing eLine Design as your 3D CAD Drafting and Design Resource.
Christopher Clay(Owner of eLine Design llc) Edited by: elinedesign on May 7, 2010 11:29 PM
*Walt Jaquith
Message 2 of 4 (237 Views)

Re: Lessons For Preparing A 3D CAD Model for Inventor

05-07-2010 04:43 PM in reply to: elinedesign

Thanks, man. I needed a good laugh today.
Active Contributor
Posts: 27
Registered: ‎04-11-2010
Message 3 of 4 (237 Views)

Re: Lessons For Preparing A 3D CAD Model for Inventor

05-07-2010 08:53 PM in reply to: elinedesign
Just for the beginners
*Expert Elite*
Posts: 2,815
Registered: ‎06-11-2009
Message 4 of 4 (237 Views)

Re: Lessons For Preparing A 3D CAD Model for Inventor

05-08-2010 06:17 PM in reply to: elinedesign
With all due respect, this is not the proper place for posting lessons on Inventor. For Inventor specific content, please refer to :
You will get useful feedback about your lessons if you post where the Inventor users post, not here.
Planta1 Revit Online Consulting | | my Twitter | The Planta1 Blog

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community