Classifieds

Reply
*Expert Elite*
CelticDesignServices
Posts: 507
Registered: ‎11-29-2011
Message 1 of 6 (1,035 Views)

Do you need a Designer and/or CAD Administrator?

1035 Views, 5 Replies
11-12-2012 10:47 AM

We are Celtic Design Services, LLC.

 

We currently have 4 senior level mechanical designers and one CAD Administrator available for assignment (direct or contract). Each has well over 20 yrs experience in AutoCad and most have at least 10 yrs on Inventor. Our Cad Admin has been on Inventor since release 3 and was an early adapter of Vault Workgroups, he also has over 30 yrs in the mechanical design field.

 

Most have their own license of Inventor Ultimate and their own hardware if needed. Most can also relocate as needed and/or work remotely.

 

our rates are extremely competative and very flexible to your needs. Don't hesitate to contact us and see for yourself.

 

Find us on LinkedIn at: http://www.linkedin.com/pub/celticdesignservices-llc/51/610/398

New EE Logo.PNG


Inventor.PNG     vault.PNG



Jim
Celtic Design Services, LLC

Inventor/AutoCAD/Vault WorkGroups
Always for hire - celticdesign01ATyahooDOTcom
https://www.facebook.com/pages/Celtic-Design-Services-LLC/184666001666426
==========================================================
Please use the "Accept as Solution" and "Give Kudos" functions as appropriate to further enhance the value of these forums.

Go raibh maith agat (in other words...Thank you!)
*Expert Elite*
CelticDesignServices
Posts: 507
Registered: ‎11-29-2011
Message 2 of 6 (881 Views)

Re: Do you need a Designer and/or CAD Administrator?

12-12-2012 11:40 AM in reply to: CelticDesignServices

***Update***

 

We have one Designer/CAD Administrator available for hire at the current time (others can work on a part-time, off-site basis if need be).

 

If you are in need of Mechanical Design or CAD Administration help on AutoDesk Inventor and/or Vault, contact us before he's taken.

New EE Logo.PNG


Inventor.PNG     vault.PNG



Jim
Celtic Design Services, LLC

Inventor/AutoCAD/Vault WorkGroups
Always for hire - celticdesign01ATyahooDOTcom
https://www.facebook.com/pages/Celtic-Design-Services-LLC/184666001666426
==========================================================
Please use the "Accept as Solution" and "Give Kudos" functions as appropriate to further enhance the value of these forums.

Go raibh maith agat (in other words...Thank you!)
*Expert Elite*
CelticDesignServices
Posts: 507
Registered: ‎11-29-2011
Message 3 of 6 (628 Views)

Re: Do you need a Designer and/or CAD Administrator?

03-06-2013 04:24 PM in reply to: CelticDesignServices

***UPDATE***

 

We have a couple of Designers and CAD Admins coming up on the end of their respective contracts.

 

Be sure to contact us if you have needs before they are re-assigned.

New EE Logo.PNG


Inventor.PNG     vault.PNG



Jim
Celtic Design Services, LLC

Inventor/AutoCAD/Vault WorkGroups
Always for hire - celticdesign01ATyahooDOTcom
https://www.facebook.com/pages/Celtic-Design-Services-LLC/184666001666426
==========================================================
Please use the "Accept as Solution" and "Give Kudos" functions as appropriate to further enhance the value of these forums.

Go raibh maith agat (in other words...Thank you!)
*Expert Elite*
CelticDesignServices
Posts: 507
Registered: ‎11-29-2011
Message 4 of 6 (437 Views)

Re: Do you need a Designer and/or CAD Administrator?

04-23-2013 11:13 AM in reply to: CelticDesignServices

****UPDATE****

 

We have 2 Designers, 1 Project Engineer, and 1 CAD Admin available for assignment in the New England area.

(the Project Engineer is experienced with Inventor, AutoCAD and Solidworks)

 

We also have 4 Designers and 2 CAD Admins available or soon-to-be available for assignment in the Pacific Northwest.

(the 2 Admins can also work as Designers and one is willing to relocate anywhere in the USA for the contract as need be)

 

Please contact us to find out how we can help you.

Visit us on LinkedIn:

 

http://www.linkedin.com/pub/celticdesignservices-llc/51/610/398

New EE Logo.PNG


Inventor.PNG     vault.PNG



Jim
Celtic Design Services, LLC

Inventor/AutoCAD/Vault WorkGroups
Always for hire - celticdesign01ATyahooDOTcom
https://www.facebook.com/pages/Celtic-Design-Services-LLC/184666001666426
==========================================================
Please use the "Accept as Solution" and "Give Kudos" functions as appropriate to further enhance the value of these forums.

Go raibh maith agat (in other words...Thank you!)
*Expert Elite*
CelticDesignServices
Posts: 507
Registered: ‎11-29-2011
Message 5 of 6 (285 Views)

Re: Do you need a Designer and/or CAD Administrator?

10-14-2013 04:31 PM in reply to: CelticDesignServices

Update time once again.

 

We have plenty of contractors available for work.

We can offer services from basic Drafting/Detailing to Design to CAD Administration and even Animation, on or off site.

 

We can also cover software releases of Inventor and Vault from 2010 thru 2014.

 

Our rates are very competitive, give us a try.

 

Thanks

 

New EE Logo.PNG


Inventor.PNG     vault.PNG



Jim
Celtic Design Services, LLC

Inventor/AutoCAD/Vault WorkGroups
Always for hire - celticdesign01ATyahooDOTcom
https://www.facebook.com/pages/Celtic-Design-Services-LLC/184666001666426
==========================================================
Please use the "Accept as Solution" and "Give Kudos" functions as appropriate to further enhance the value of these forums.

Go raibh maith agat (in other words...Thank you!)
*Expert Elite*
CelticDesignServices
Posts: 507
Registered: ‎11-29-2011
Message 6 of 6 (156 Views)

Re: Do you need a Designer and/or CAD Administrator?

04-18-2014 10:53 AM in reply to: CelticDesignServices

Just a quick update and bump to the top of the list.

 

We currently have 1 full time CAD Admin, 2 full time Designers (1 available to relocate as needed) and 1 part time CAD Admin/Designer available.

We also have two WA state certified Professional Engineers (1 Mechanical, 1 Civil) on call if needed.

 

Each of our employees can provide their own hardware and software as needed.

Please, contact us with your needs and for quotes.

New EE Logo.PNG


Inventor.PNG     vault.PNG



Jim
Celtic Design Services, LLC

Inventor/AutoCAD/Vault WorkGroups
Always for hire - celticdesign01ATyahooDOTcom
https://www.facebook.com/pages/Celtic-Design-Services-LLC/184666001666426
==========================================================
Please use the "Accept as Solution" and "Give Kudos" functions as appropriate to further enhance the value of these forums.

Go raibh maith agat (in other words...Thank you!)

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community