Classifieds

Reply
Member
jgtex
Posts: 5
Registered: ‎12-01-2007
Message 1 of 11 (415 Views)

2D to 3D Conversion

415 Views, 10 Replies
12-01-2007 09:25 AM
I am an inventor in the alternative energy industry. I currently sub-contract my drafting work to a guy who has AutoCad 2000. He does not have any 3D software. I need to upgrade those drawings into 3D, but I don't want to take the time to learn these software products. Is there anyone out there who would do this work for me on a contract basis? I prefer to work with someone in the Dallas, TX area so that he/she can visit my site and see things in person before making the drawings.
Distinguished Contributor
teiarch
Posts: 4,414
Registered: ‎03-01-2004
Message 2 of 11 (416 Views)

Re: 2D to 3D Conversion

12-01-2007 06:17 PM in reply to: jgtex
Wish I were closer; I'd like to take a crack at it.
Distinguished Contributor
TerryThomas
Posts: 551
Registered: ‎11-01-2003
Message 3 of 11 (416 Views)

Re: 2D to 3D Conversion

12-02-2007 03:42 AM in reply to: jgtex
Why not contact Jay Moore at Americad. They are in the Dallas area and do contract drawing work for construction companies so they must be very used to converting 2D to 3D. If your alternative energy is geared towards buildings they would have a vast knowledge to draw on. They also do 3D rendering so could visualise what you are trying to achieve. I am in UK but from what I have read they seem extremely helpful and are very adventurous in outlook.

Good luck with your inventions!
Distinguished Contributor
c.henry
Posts: 1,053
Registered: ‎01-15-2006
Message 4 of 11 (416 Views)

Re: 2D to 3D Conversion

12-02-2007 04:33 PM in reply to: jgtex
I would be interested in your project. I am in Tennessee but able to travel as needed.



Chris

chenry@engineersupportservice.com
Distinguished Contributor
jackshield
Posts: 3,202
Registered: ‎10-22-2003
Message 5 of 11 (416 Views)

Re: 2D to 3D Conversion

12-03-2007 10:07 AM in reply to: jgtex
If your still looking, I am in Oklahoma City and can make trips to Dallas. Skilled in 3d, been doing mech design for 10 yrs. if need more info, email me shieldjack@sbcglobal.net
Active Contributor
vizwhiz
Posts: 42
Registered: ‎12-12-2003
Message 6 of 11 (416 Views)

Re: 2D to 3D Conversion

12-03-2007 01:27 PM in reply to: jgtex
hi There

JGTex

i am in Arizona and can do 3d modeling and rendering for you
send me some photos and give me a call sometime, i can help you

2dcd2b3d@gmail.com

i will respond with futher contact info: name, phone # etc

Thanks
Active Contributor
vizwhiz
Posts: 42
Registered: ‎12-12-2003
Message 7 of 11 (415 Views)

Re: 2D to 3D Conversion

12-03-2007 01:28 PM in reply to: jgtex
duplicate Message was edited by: vizwhiz
Active Contributor
vizwhiz
Posts: 42
Registered: ‎12-12-2003
Message 8 of 11 (415 Views)

Re: 2D to 3D Conversion

12-03-2007 01:28 PM in reply to: jgtex
hi There

JGTex

i am in Arizona and can do 3d modeling and rendering for you
send me some photos and give me a call sometime, i can help you

2dcd2b3d@gmail.com

i will respond with futher contact info: name, phone # etc

Thanks
*DaveS
Message 9 of 11 (415 Views)

Re: 2D to 3D Conversion

12-03-2007 01:30 PM in reply to: jgtex
This ain't looking good kid...

Have fun,
Dave
--
Sorry Chip!!
..
wrote:
hi There

JGTex

i am in Arizona and can do 3d modeling and rendering for you
send me some photos and give me a call sometime, i can help you

2dcd2b3d@gmail.com

i will respond with futher contact info: name, phone # etc

Thanks
Active Contributor
larry16
Posts: 26
Registered: ‎06-11-2007
Message 10 of 11 (415 Views)

Re: 2D to 3D Conversion

12-03-2007 02:10 PM in reply to: jgtex
I don't know about the 3d but its built into Autocad 2000
converting is not a problem ive been using Autocad since it began

if you have drawn on the board as i did for 25 years its a givin

iso or 3D its not a problem

send an email larry16@cox.net

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community