CAD Managers

[#1]

Hi am a network admin with a problem: When quitting AutoCad r13c4 using the
WEND command and the drawing is located on a mapped network drive the
drawing cannot be opened again. We have a NT 4.0 Server and drive s: is
mapped from the servers harddrive. The same thing happens when trying to
open a single VBLOCK but not when just using the Save and Save As command I
could not find anything about this in the Autodesk hpage so i'd be greatful
if someone recognizes this problem
Anders

[#2]

Perhaps upgrading to one of the newer versions would help.

[#3]

release 13? Really?

I don't know anyone that actually used 13...most skipped it and went straight to 14....

unfortunately you probably wont' find much help here, if I'm not mistaken you're about 14 years behind the current release. much has changed.

WEND is not recognized in 2006.

[#4]

I used it my last year of high school in a couple of classes... and
never used 14 at all. I liked it better than 12, but, of course, that's
from a non-production standpoint.
Obviously, folks that are stuck in the past stopped at R14 and use that
as the 'gold standard'. ~shrug~

Melanie Perry
***not all who wander are lost***
http://Tech-Tea.com
http://MistressOfTheDorkness.blogspot.com

Paul Caruthers wrote:
> release 13? Really?
>
> I don't know anyone that actually used 13...most skipped it and went straight to 14....
>
> unfortunately you probably wont' find much help here, if I'm not mistaken you're about 14 years behind the current release. much has changed.
>
> WEND is not recognized in 2006.

[#5]

Why are we commenting on a post from 1998?


wrote in message news:5970612@discussion.autodesk.com...
release 13? Really?

I don't know anyone that actually used 13...most skipped it and went
straight to 14....

unfortunately you probably wont' find much help here, if I'm not mistaken
you're about 14 years behind the current release. much has changed.

WEND is not recognized in 2006.

[#6]

:-) good question. Some of us are really looking forward to a much needed, extra long weekend.

Paul Caruthers

[#7]

1998? Whoa... that's when I graduated high school... (in my defense,
although I do need a vacation... I am in a newsreader, so I can't see
the OP ;-p)

Mason < wrote:
> Why are we commenting on a post from 1998?
>
>
> wrote in message news:5970612@discussion.autodesk.com...
> release 13? Really?
>
> I don't know anyone that actually used 13...most skipped it and went
> straight to 14....
>
> unfortunately you probably wont' find much help here, if I'm not mistaken
> you're about 14 years behind the current release. much has changed.
>
> WEND is not recognized in 2006.

[#8]

Because there aren't any good new posts to beat up on?

Mason < wrote:
> Why are we commenting on a post from 1998?
>
>
> wrote in message news:5970612@discussion.autodesk.com...
> release 13? Really?
>
> I don't know anyone that actually used 13...most skipped it and went
> straight to 14....
>
> unfortunately you probably wont' find much help here, if I'm not mistaken
> you're about 14 years behind the current release. much has changed.
>
> WEND is not recognized in 2006.

[#9]

It's not when I graduated high school, but it is the year I discovered these
newsgroups.

--
Joshua Tapp

"Wanderer" wrote in message
news:5970698@discussion.autodesk.com...
1998? Whoa... that's when I graduated high school... (in my defense,
although I do need a vacation... I am in a newsreader, so I can't see
the OP ;-p)

Mason < wrote:
> Why are we commenting on a post from 1998?
>
>
> wrote in message news:5970612@discussion.autodesk.com...
> release 13? Really?
>
> I don't know anyone that actually used 13...most skipped it and went
> straight to 14....
>
> unfortunately you probably wont' find much help here, if I'm not mistaken
> you're about 14 years behind the current release. much has changed.
>
> WEND is not recognized in 2006.

[#10]

[{<>}]

Just putting this here to see if someone unearths it 10 years from now.
.-)

I didn't find the ng until 1999.
And I never graduated high school. It's hard to graduate from something you
never went to.
.-o


"Joshua Tapp" wrote in message
news:5970819@discussion.autodesk.com...
It's not when I graduated high school, but it is the year I discovered these
newsgroups.

--
Joshua Tapp

"Wanderer" wrote in message
news:5970698@discussion.autodesk.com...
1998? Whoa... that's when I graduated high school... (in my defense,
although I do need a vacation... I am in a newsreader, so I can't see
the OP ;-p)

Mason < wrote:
> Why are we commenting on a post from 1998?
>
>
> wrote in message news:5970612@discussion.autodesk.com...
> release 13? Really?
>
> I don't know anyone that actually used 13...most skipped it and went
> straight to 14....
>
> unfortunately you probably wont' find much help here, if I'm not mistaken
> you're about 14 years behind the current release. much has changed.
>
> WEND is not recognized in 2006.