CAD Managers

Reply
*Expert Elite*
Charles_Shade
Posts: 8,194
Registered: ‎04-10-2005
Message 1 of 3 (536 Views)

Stair Detailing

536 Views, 2 Replies
01-15-2013 12:40 PM

I've been approached about doing stair drawings for metal fabricators.

What, if anything, are you all using software wise and what should I look for?

 

And any thoughts you may have. Thanks.

Regards, Charles Shade            Win8 FAQ
CSHADEDESIGN|AUTOCAD LT|LT-KB|DYNAMIC BLOCKS

 
Please mark Accept as Solution if your question is answered. Kudos gladly accepted.
*Expert Elite*
PaulMunford
Posts: 859
Registered: ‎11-13-2006
Message 2 of 3 (508 Views)

Re: Stair Detailing

01-19-2013 01:03 PM in reply to: Charles_Shade

As always, it depends on the results required.

 

If they want a 'specification' model/drawing to give to Architects I would recommend Revit.

 

If they have their process down and they just want some simple calculations, AutoCAD will do it.

 

If they want folded metal details, frame cut lists, hole patterns etc, I would recommend Inventor.

 

There are more specialized programmes out there. I know that Radan (makers of AlphaCAM) do some specific CNC code generating programmes for Timber stairs - I'm not sure about metal ones, sorry!

The CAD Setter Out Blog @CadSetterOut

Inventor Surfacing | AutoCAD | CAD Standards
 
Please use the Mark Solutions! Accept as Solution or Give Kudos! Kudos functions - Thank you!
*Expert Elite*
Charles_Shade
Posts: 8,194
Registered: ‎04-10-2005
Message 3 of 3 (482 Views)

Re: Stair Detailing

01-21-2013 03:27 PM in reply to: PaulMunford

Thanks for the input.

Most of this is the other way around: Architect specifies the shaft and other info and the fabricator needs shop drawings.

 

A fabricator in my area suggested products from SSDCP. Apprently these are discipline specific and have shapes, connections, templates already to go.

Regards, Charles Shade            Win8 FAQ
CSHADEDESIGN|AUTOCAD LT|LT-KB|DYNAMIC BLOCKS

 
Please mark Accept as Solution if your question is answered. Kudos gladly accepted.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Manufacturing CAD & IT Manager Resource
Additional information for installing, licensing & deploying Inventor, the Product Design Suites and Factory Design Suites.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community




Connect with Us

Twitter

Pinterest

Blog

Youtube