I've been approached about doing stair drawings for metal fabricators.
What, if anything, are you all using software wise and what should I look for?
And any thoughts you may have. Thanks.
As always, it depends on the results required.
If they want a 'specification' model/drawing to give to Architects I would recommend Revit.
If they have their process down and they just want some simple calculations, AutoCAD will do it.
If they want folded metal details, frame cut lists, hole patterns etc, I would recommend Inventor.
There are more specialized programmes out there. I know that Radan (makers of AlphaCAM) do some specific CNC code generating programmes for Timber stairs - I'm not sure about metal ones, sorry!
Thanks for the input.
Most of this is the other way around: Architect specifies the shaft and other info and the fabricator needs shop drawings.
A fabricator in my area suggested products from SSDCP. Apprently these are discipline specific and have shapes, connections, templates already to go.
Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register
Start with some of our most frequented solutions to get help installing your software.
Upgrading to a 2015 product? Make sure to check these out 1st!
Boldly Install, Configure and Deploy Autodesk Software.
Your one-stop shop for the latest solutions, breaking news, and behind the scenes access to the world of Autodesk support.