CAD Managers

CAD Managers

Reply
Valued Mentor
jclaidler
Posts: 513
Registered: ‎10-29-2009
Message 1 of 7 (2,996 Views)

Shrinkwrap for AutoCAD: LISP

2996 Views, 6 Replies
02-11-2011 06:41 AM

Anyone have a LISP routine that will create a border around selected objects?

Lke shrinkwrap?

 

Thanks.

_______________________________________________________________
ITO - Application Management
AutoCAD 2014 | Inventor Professional 2014 | Vault Professional 2014

*Expert Elite*
TravisNave
Posts: 10,109
Registered: ‎01-14-2005
Message 2 of 7 (2,977 Views)

Re: Shrinkwrap for AutoCAD: LISP

02-11-2011 01:06 PM in reply to: jclaidler

You might also ask that question in the LISP forum.  You might get better results.

 

http://forums.autodesk.com/t5/Visual-LISP-AutoLISP-and-General/bd-p/130

 

Good Luck!

Travis Nave Send TravisNave a Private Message                       Need help in your post? Mention me with @TravisNave
Valued Mentor
TerryDotson
Posts: 483
Registered: ‎06-06-2010
Message 3 of 7 (2,969 Views)

Re: Shrinkwrap for AutoCAD: LISP

02-11-2011 03:37 PM in reply to: jclaidler

Simply draw a loose rectangle around your objects and use the BOUNDARY command, then erase the outer rectangles.

*Expert Elite*
pendean
Posts: 22,125
Registered: ‎11-06-2003
Message 4 of 7 (2,948 Views)

Re: Shrinkwrap for AutoCAD: LISP

02-14-2011 05:55 AM in reply to: jclaidler

Like a WIPEOUT?

Dean Saadallah Blog | Facebook | Google+ | Twitter | PINS
Valued Mentor
jclaidler
Posts: 513
Registered: ‎10-29-2009
Message 5 of 7 (2,941 Views)

Re: Shrinkwrap for AutoCAD: LISP

02-14-2011 10:48 AM in reply to: jclaidler

Nope, not like WIPEOUT.  Easily stated, I need a line drawn around the outside edges of selected blocks.

_______________________________________________________________
ITO - Application Management
AutoCAD 2014 | Inventor Professional 2014 | Vault Professional 2014

New Member
kelley.pearson
Posts: 2
Registered: ‎08-19-2011
Message 6 of 7 (2,339 Views)

Re: Shrinkwrap for AutoCAD: LISP

08-16-2012 10:39 AM in reply to: jclaidler
Easy. Draw a closed polyline (rough) rectangle just outside your block or any object you want. Then use the BOUNDARY command with lsland detention. Choose Region or Polyline as Object type to create. Pick OK, then Enter if you do not want to select addition interal boundaries. Erase the orginal rough rectangle and outer boudary on it. You're left with your object plus the inner boundary shrinkwrap. No Lisp needed. Done! :smileyhappy:
New Member
jefferypsanders
Posts: 2
Registered: ‎02-14-2012
Message 7 of 7 (1,370 Views)

Re: Shrinkwrap for AutoCAD: LISP

09-24-2013 02:51 PM in reply to: jclaidler

I posted a cheap attempt at shrinkwrapping using the boundary command here:

 

http://www.jefferypsanders.com/autolisp.html

 

JPS

Announcements
Manufacturing CAD & IT Manager Resource
Additional information for installing, licensing & deploying Inventor, the Product Design Suites and Factory Design Suites.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.