CAD Managers

CAD Managers

Reply
Member
andymale
Posts: 4
Registered: ‎06-08-2008
Message 1 of 8 (811 Views)
Accepted Solution

AU 2008 Justification Doc / Flyer

811 Views, 7 Replies
07-02-2008 07:19 PM
Hello all,

I'm hoping to attend this years AU in Vegas, however,

1. Due to it being in Vegas, my Manager will probably see it purely as a jolly. (which it's not)..
2nd, Since i'm located "Down Under" (New Zealand) the travel and overall costs will also be fairly high, again putting off management.

Anyway, My question/discussion/begging letter is . As I can't seem to find a flyer anywhere, (the website is great if you want to surf it, however my bosses would prefer a detailed flyer and some sort of justification/benefits). Has anyone written a justification to management yet for them to go? (a successful one would be great!)..

and if so, please, please please can i have a copy. I'll shout you lunch if it works!!!

Thanks in Advance

Andy Male
NZ National CAD/GIS Coordinator
Andrew.Male@MWHGlobal.com
Distinguished Contributor
robincapperw
Posts: 440
Registered: ‎11-12-2003
Message 2 of 8 (811 Views)

Re: AU 2008 Justification Doc / Flyer

07-03-2008 12:35 AM in reply to: andymale
This post, after my first trek to AU, might help.

http://rcd.typepad.com/rcd/2005/01/my_autodesk_uni_1.html

Regards,
Robin Capper
Blog: http://rcd.typepad.com/
*Matt Stachoni
Message 3 of 8 (811 Views)

Re: AU 2008 Justification Doc / Flyer

07-03-2008 05:34 AM in reply to: andymale
On Thu, 3 Jul 2008 02:19:33 +0000, andymale <> wrote:

>Hello all,
>
>I'm hoping to attend this years AU in Vegas, however,
>
>1. Due to it being in Vegas, my Manager will probably see it purely as a jolly. (which it's not)..
>2nd, Since i'm located "Down Under" (New Zealand) the travel and overall costs will also be fairly high, again putting off management.
>
>Anyway, My question/discussion/begging letter is . As I can't seem to find a flyer anywhere, (the website is great if you want to surf it, however my bosses would prefer a detailed flyer and some sort of justification/benefits). Has anyone written a justification to management yet for them to go? (a successful one would be great!)..
>
>and if so, please, please please can i have a copy. I'll shout you lunch if it works!!!
>
>Thanks in Advance
>
>Andy Male
>NZ National CAD/GIS Coordinator
>Andrew.Male@MWHGlobal.com

Well, I'm gonna be there. That should be good enough. :smileyhappy:

See if Robin's paper airplane has any empty seats!

Matt
mstachoni@verizon.net
mstachoni@bhhtait.com
Distinguished Contributor
dxarhoulakos
Posts: 330
Registered: ‎04-12-2006
Message 4 of 8 (811 Views)

Re: AU 2008 Justification Doc / Flyer

07-03-2008 01:49 PM in reply to: andymale
http://au.autodesk.com/blogs/view/How_convince_your_boss_send_you/
Member
andymale
Posts: 4
Registered: ‎06-08-2008
Message 5 of 8 (811 Views)

Re: AU 2008 Justification Doc / Flyer

07-03-2008 02:23 PM in reply to: andymale
for some reason that link doesnt work, and the podcast just goes back to the front page again. :smileysad: yes i have logged in.

cheers

Andy
Distinguished Contributor
dxarhoulakos
Posts: 330
Registered: ‎04-12-2006
Message 6 of 8 (811 Views)

Re: AU 2008 Justification Doc / Flyer

07-07-2008 07:07 AM in reply to: andymale
yep. i noticed that too. used to be a good link...

dont know what happened...
*Expert Elite*
JDMather
Posts: 26,526
Registered: ‎04-20-2006
Message 7 of 8 (811 Views)

Re: AU 2008 Justification Doc / Flyer

07-07-2008 09:31 AM in reply to: andymale
http://au.autodesk.com/event/experience/attend/justify/
Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Member
andymale
Posts: 4
Registered: ‎06-08-2008
Message 8 of 8 (811 Views)

Re: AU 2008 Justification Doc / Flyer

07-07-2008 01:42 PM in reply to: andymale
Thanks JD Mather!!! Thanks for the link, If i manage to go, i'll shout you lunch as promised. Hey cadbydx might shout you a lunch too:smileyhappy: for sending the link. Cheers.

Now, Just gotta write up a good justification!!! wish me luck!!!

Andy Male
NZ National CAD/GIS Coordinator
Andrew.Male@MWHGlobal.com
Announcements
Manufacturing CAD & IT Manager Resource
Additional information for installing, licensing & deploying Inventor, the Product Design Suites and Factory Design Suites.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.