Autodesk Simulation CFD

[#1]

I ran six jobs overnight, on Simulation CFD 360.  Five of those jobs ran successfully.  One of those jobs is listed as "Failed" in the Simulation Job Manager.

Looking at the convergence plot, it appears that 424 iterations were completed, and the simulation may have converged.

Is there any way I can access the results?  Or do I have to restart from iteration 0?

[#2]

Hi Nathan,

I know this is a bit old with no feedback, but I figured I would give some feedback for others that are monitoring.

Once the job has failed the results are lost.  Did the log files give you any reason why the job failed?  The job either diverged while solving OR there was a issue in the cloud that caused the anlaysis to fail.  If it was a cloud issue I would just try solving the anlaysis again first.  When the job fails in the cloud your credits should not be deducted if you don't have unlimited access.

Royce

[#3]

I suspected as much.  The Simulation Job Manager listed the status as "Failed."  But in the Design Study Bar, the scenario status "running" icon was shown.  My solution was to delete the scenario and build a new one.