Autodesk Simulation CFD
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic to the Top
- Bookmark
- Subscribe
- Printer Friendly Page
Data Center Simulation Recommenda
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
We have recently started Data Center simulations in our company portfolio and would like to get recommendations to try to improve accuracy and increase convergence in our models.
Usually we model rooms no smaller than 100sqm with basic features (CRAH, Racks, Raised Floor, Floor Grilles, Aisle Containment).
For example, I've read in some posts that Advection 2 is recomended for Data Center as well as to relax pressure from 0,5 to 0,25 in the solution control.
Can anyone elaborate a little bit more on these two features and think of any other options that might benefit these kind of models.
Many thanks in advance.
Re: Data Center Simulation Recommenda
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
Hi Francesc,
Have you reviewed our AEC best practices?
Running with ADV2/ADV5 is a good idea, but you don't have to adjust your solver solution control sliders unless you have to. Adjusting these slider will require your model to run more iterations to reach convergence.
-Royce
