Autodesk Robot Structural Analysis
I created the attached sections below as solid sections in Section Designer, because when i tried to import them as thin-walled sections i could not calculate the necessary elastic moduli Wel etc.
Then when i chose to save it to database only user database is available and from what i could understand the specific database called RUSERpro.
When i open Section Database RUSER the above sections are not available and therefore i cannot assign them the specific ID i.e 1001 etc as to perform the thin walled design for my model.
When i tried the steel design one of the errors stated that since i have defined it as a solid section thin-walled section analysis could not be performed.
I am still a bit confused
Then when i chose to save it to database only user database is available and from what i could understand the specific database called RUSERpro.
If you see section database name USER -> database file name is called ruserpro.xml
When i open Section Database RUSER the above sections are not available and therefore i cannot assign them the specific ID i.e 1001 etc as to perform the thin walled design for my model.
Restart Robot and check
Rafal Gaweda
Product Support
Autodesk, Inc.
mrdrakopoulos wrote:
No change, and i noticed that i cannot alter the units of the user database from in,lb to SI units
Please check the following pics
Open database by File \ Open :
"c:\Users\<user_name>\AppData\Roaming\Autodesk\Str
Units display:
Rafal Gaweda
Product Support
Autodesk, Inc.
Still i cannot find where the sections are saved.
I tried to import one of the sections i saved in the user database into the section definition but still the only one i get to choose is only one default section!
What i cannot understand how it is possibly to choose those section in the model and not in the section definition and section database !!
