Export Steel Slap robot to Revit structure.

[Anonymous]

Hi all.

I is prolem.

I design slap RC, But why I not export Steel  of robot to revit strucutre ??

[Artur.Kosakowski]

Please check:

http://forums.autodesk.com/t5/Autodesk-Robot-Structural/upload-slab-reinforcement-to-model-in-revit/...

[Anonymous]

Thank Artur.

But I don't kwon Artut write : " On the other hand you can export it to ASD Reinforcement and generated dwg drawings there which you can link with the Revit model."

I do not Export  ASD Reinforcement to Revit Modol???

[Artur.Kosakowski]

It is not possible to directly export  reinforcement of slab generated in Robot to Revit but you may find the following solution helpful:

1. Generate slab reinforcement drawing in Robot

2. Open this drawing in ASD reinforcement and save it as dwg

3. Link this dwg file with the project in Revit

[Anonymous]

Thank you.

But I do not use steel of revit structure.?????

Please see video.

http://www.screencast.com/t/ZBMO8OtzQZh

Thank again.

[Artur.Kosakowski · Accepted solution]

As you linked the 2D dwg drawing you will not be able to generate a cross section using Revit tool that is intended for a 3D model. The cross section view should be created in ASD and saved in the same or as a separate dwg file (that you link to Revit).