Autodesk Robot Structural Analysis

[#1]

would the message in the attachement mean that the calculations with bending are concidered or not ( regarding the the ligne just above )

[#2]

This means that bending has not been take into account for fire resistance calculations.

[#3]

Ist there any reason for that or is it a limitation to the current version of the software ?

Is all the warnings appearing between two message numbers are only relative to the firt one ?

thank you

[#4]

What is the design code you selected?

Could you send me this example?

[#5]

Calculation option  BAEL91 mod99 Regulation BAEL91RPS2000.

having a a problem with my model : connot generate ULS and SLS combinations ( only ACC are generated ! ).

thanks for support

[#6]

Send me the rtd file please.

[#7]

ok , not managed to upload to autocad360 , please find a link blelow :

http://wtrns.fr/pnjYq_8Zq2Vdmr

thanks

[#8]

---

Calculation option  BAEL91 mod99 Regulation BAEL91RPS2000.

having a a problem with my model : connot generate ULS and SLS combinations ( only ACC are generated ! ).

---

You have to define relations among load cases (see the attached picture)

Which RC column shall I look at?

 

[#9]

Exporting the column 727 for example

[#10 · Accepted solution]

The warning informs that the estimated method for fire resistance is not applicable for bending. It can only be used for compression and slenderness below 35 as stated in DTU P 92-701.

The exact method for bending is not available in Robot yet as far as I know you the freeware named CIMFEU for this kind of calculation is available from:

CIMbéton

7, Place de la Défense

92 974 Paris-La-Défense Cedex

+33 (0) 1 55 23 01 12

If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.