Autodesk Revit Structure

[#1]

Has anyone come across a family for a 4x2 wood floor truss (pictured)? 

One with wood webs - not the "TJL" version with the metal webs that comes with Revit. The TJL trusses are very hard (if not impossible) to even find. Maybe that part is a geographical thing (we are on the east coast: Virginia), but I'm even getting slim pickings when I Google TJL trusses so I'm doubting the geographical angle.

Does anyone have a clue why Revit Structure doesn't come with something as common as this, but does include a family for floor trusses that is all but obsolete? 

Thanks in advance!

[#2]

In the past when I needed a family I could not find I edited one the was close to suits my needs. I'm not sure if you need to analysis the structural abilities of the truss, but taking a standard Howe Flat Truss and editing will allow this. If you just need a family to represent a truss I can't imagine that it will take more than a few minutes to build a simply family.

Anyone have one built that you want to share?

Thanks for posting. 

[#3]

Seriously?!?  THAT is your reply?

I asked why you (Autodesk) DO include an obsolete family but DO NOT include one for a very common item.  You did not even approach my question, other than to offer a band-aid fix of using a Howe flat truss which is not even close to the same thing, which also leads me to believe that you don't have a good working knowledge of construction. 

A truss like this (including the Howe) is intended for roof construction & the members have the long side vertical, while a 4x2 floor truss has the long side of its members horizontal.  If you had construction experience, you would know this or would have at least seen the difference from the picture I posted, or possibly investigated before you posted your poor response.

Would you mind addressing my question about why you include an obsolete family but do not include one for a very common mode of construction? 

Please??

[#4]

Have you thought about contacting the Truss Man'f. to see if they have the Truss Series you Desire?  Just a thought.  Or maybe learning how to create one?  Again, just a thought.

[#5 · Accepted solution]

To directly answer your question, we cannot add every element for every trade. Please use this link to provide feedback on content: http://usa.autodesk.com/adsk/servlet/index?siteID=123112&id=1109794

Thanks again,

[#6]

History

In 1958, Art Troutner and Boise native Harold “Red” Thomas first met. Troutner was already an accomplished inventor, architect and engineer, and Thomas was a traveling lumber salesman who had studied forestry at the University of Idaho. In 1960, the two joined forces to form a company to market and manufacture Troutner’s lightweight wood and steel composite Open-Web truss invention, which is the predecessor to the RedBuilt™ open-web trusses we continue to manufacture today.

In 2010, RedBuilt™purchased certain assets such as equipment, raw materials inventory and intellectual property from long-time competitor Standard Structures Inc.

Please check out the link below:

http://www.redbuilt.com/