• Industries
  • Products
  • Buy
  • Services & Support
  • Communities
  • Discussion Groups

    Autodesk Revit MEP

    Reply
    Active Member
    Posts: 10
    Registered: ‎07-05-2012
    Accepted Solution

    Graphics issues

    163 Views, 2 Replies
    07-05-2012 06:17 PM

    Check out the attached screen print. I am seeing double! What could be the problem? Was working before?

    Todd Barry (Mechanical Design Engineer)

    Sydney, Australia
    Mob: 0438 479 967

    E: tbarry@fredon.com.au or toddbarry7@gmail.com


    Please use plain text.
    *Expert Elite*
    Posts: 1,906
    Registered: ‎08-28-2009

    Re: Graphics issues

    07-06-2012 05:56 AM in reply to: bluelion

    Would you be able to post the family file here to see if any of us see the same thing?

     

    ⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗
    Welcome to the Autodesk forums, bluelion!
    Feel free to post any questions you may have! There are many experienced users here who generously contribute their time and effort to supporting
    their peers. This is an open, peer-supported forum, so feel free to contribute any useful information or experiences to any of the topics you see here.
    We hope you'll stick around a while and help strengthen the value of this community!
    ───────────────────────────────────────────────────────────────────────────────────────────
    Be sure to review the Ground Rules, visit the FAQ Forum, and use the Search feature prior to posting a question, as it's likely been asked before.
    ⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗⸗

    Corey D.                                                                                                                                                               LogoEE.png   AutoCAD user  Revit user
    ───────────────────────────────────────────────────────────────────────────────────────────
    ⁞|⁞ Please use the Mark Solutions!.Accept as Solution and Give Kudos!Give Kudos functions as appropriate to further enhance the value of these forums. Thank you! ───────────────────────────────────────────────────────────────────────────────────────────
    Please use plain text.
    Active Member
    Posts: 10
    Registered: ‎07-05-2012

    Re: Graphics issues

    07-06-2012 05:36 PM in reply to: bluelion

    I think the issue is solved somehow by not ticking the "use Hardware acceleration" box found when you go to graphics tab in options.

     

    Why did this fix the issue?

    Todd Barry (Mechanical Design Engineer)

    Sydney, Australia
    Mob: 0438 479 967

    E: tbarry@fredon.com.au or toddbarry7@gmail.com


    Please use plain text.