Autodesk Revit Architecture

[#1]

Scott, I can not open and or save the file...any suggestion? Daniel "Scott Davis" escribió en el mensaje news:41080a5d_1@newsprd01... > www.augi.com > > If you are a member of AUGI already, try: > > http://forums.augi.com/showthread.php?t=6082 > > (if not you can sign up for free at the URL above) > > > "Daniel Legarraga" wrote in message > news:4107fbd2_2@newsprd01... > > Any suggestion of where find Appendix A omitted in the book (just a few > > blank pages...). > > > > Daniel > > > > "Jim Balding" escribió en el mensaje > > news:40f70381$1_3@newsprd01... > > > Just to clear the air. There was never an edition published for 5.5. > > There > > > was never a Revit 5.5. The Autodesk Press book was written during the > 5.1 > > > release and updated for 6.0/6.1. The cover shot was the original image > > and > > > was distributed sometime in the 2nd quarter of 2003, and that is why > there > > > is so much confusion. > > > > > > Sorry - > > > > > > > > > "Daniel Legarraga" wrote in message > > > news:40f6b952$1_2@newsprd01... > > > > The title book is "Introducing and Implementing Autodesk Revit 5.5" > > first > > > > edition June 29, 2004. > > > > I wonder if it's updated for Revit 6.1? or we will wait for the > edition > > > > 7/8/2004. > > > > On Amazon the book is priced $33.97. > > > > > > > > Daniel > > > > > > > > "Jim Balding" escribió en el mensaje > > > > news:40f458c9$1_2@newsprd01... > > > > > David - > > > > > > > > > > I was refering to the Autodesk Press book and it is out now. > > > > > > > > > > > > > > > http://www.delmarlearning.com/Browse_CatalogDetail.asp?XXID=11963&ISBN=1401850499. > > > > > Sorry for the confusion > > > > > > > > > > - JB > > > > > > > > > > > > > > > "David Driver" wrote in message > > > > > news:40ddf517$1_3@newsprd01... > > > > > > hmmm...still working on it even as we speak > > > > > > 7/8 might be a bit optimistic (only a bit...) > > > > > > David Driver, Contributing Editor CDV Revit Courseware Series > > > > > > > > > > > > "Jim Balding" wrote in message > > > > > > news:40ce63b4$1_1@newsprd01... > > > > > > > Stan - > > > > > > > > > > > > > > That book has now been updated for Revit 6 and will be out > > shortly. > > > > The > > > > > > > target date on the web site is now 7/8/2004. > > > > > > > > > > > > > > - JB > > > > > > > > > > > > > > "Stan Fowler" wrote in message > > > > > > > news:40bf9f82$1_2@newsprd01... > > > > > > > > I was wondering when some decent books will come out for > Revit. > > > > > > > > A book by Autodesk Press has been listed for a year and is > > titled > > > > > > > > Implementing Revit 5.5 but has not been published. I am > > surprised > > > > > > > > that Autodesk has not published a book yet. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >

[#2]

I e-mailed it to you. Let me know if it works for you. "Daniel Legarraga" wrote in message news:410827df_1@newsprd01... > Scott, > I can not open and or save the file...any suggestion? > Daniel > > "Scott Davis" escribió en el mensaje > news:41080a5d_1@newsprd01... > > www.augi.com > > > > If you are a member of AUGI already, try: > > > > http://forums.augi.com/showthread.php?t=6082 > > > > (if not you can sign up for free at the URL above) > > > > > > "Daniel Legarraga" wrote in message > > news:4107fbd2_2@newsprd01... > > > Any suggestion of where find Appendix A omitted in the book (just a few > > > blank pages...). > > > > > > Daniel > > > > > > "Jim Balding" escribió en el mensaje > > > news:40f70381$1_3@newsprd01... > > > > Just to clear the air. There was never an edition published for 5.5. > > > There > > > > was never a Revit 5.5. The Autodesk Press book was written during the > > 5.1 > > > > release and updated for 6.0/6.1. The cover shot was the original > image > > > and > > > > was distributed sometime in the 2nd quarter of 2003, and that is why > > there > > > > is so much confusion. > > > > > > > > Sorry - > > > > > > > > > > > > "Daniel Legarraga" wrote in message > > > > news:40f6b952$1_2@newsprd01... > > > > > The title book is "Introducing and Implementing Autodesk Revit 5.5" > > > first > > > > > edition June 29, 2004. > > > > > I wonder if it's updated for Revit 6.1? or we will wait for the > > edition > > > > > 7/8/2004. > > > > > On Amazon the book is priced $33.97. > > > > > > > > > > Daniel > > > > > > > > > > "Jim Balding" escribió en el mensaje > > > > > news:40f458c9$1_2@newsprd01... > > > > > > David - > > > > > > > > > > > > I was refering to the Autodesk Press book and it is out now. > > > > > > > > > > > > > > > > > > > > > http://www.delmarlearning.com/Browse_CatalogDetail.asp?XXID=11963&ISBN=1401850499. > > > > > > Sorry for the confusion > > > > > > > > > > > > - JB > > > > > > > > > > > > > > > > > > "David Driver" wrote in message > > > > > > news:40ddf517$1_3@newsprd01... > > > > > > > hmmm...still working on it even as we speak > > > > > > > 7/8 might be a bit optimistic (only a bit...) > > > > > > > David Driver, Contributing Editor CDV Revit Courseware Series > > > > > > > > > > > > > > "Jim Balding" wrote in message > > > > > > > news:40ce63b4$1_1@newsprd01... > > > > > > > > Stan - > > > > > > > > > > > > > > > > That book has now been updated for Revit 6 and will be out > > > shortly. > > > > > The > > > > > > > > target date on the web site is now 7/8/2004. > > > > > > > > > > > > > > > > - JB > > > > > > > > > > > > > > > > "Stan Fowler" wrote in message > > > > > > > > news:40bf9f82$1_2@newsprd01... > > > > > > > > > I was wondering when some decent books will come out for > > Revit. > > > > > > > > > A book by Autodesk Press has been listed for a year and is > > > titled > > > > > > > > > Implementing Revit 5.5 but has not been published. I am > > > surprised > > > > > > > > > that Autodesk has not published a book yet. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >

[#3]

The file has some PDF security features in place. You will need Acrobat Reader 5.0 or greater to access the file. You can download 6.0 for free at www.adobe.com HTH - - JB "Scott Davis" wrote in message news:410841b7$1_3@newsprd01... > I e-mailed it to you. Let me know if it works for you. > > "Daniel Legarraga" wrote in message > news:410827df_1@newsprd01... > > Scott, > > I can not open and or save the file...any suggestion? > > Daniel > > > > "Scott Davis" escribió en el mensaje > > news:41080a5d_1@newsprd01... > > > www.augi.com > > > > > > If you are a member of AUGI already, try: > > > > > > http://forums.augi.com/showthread.php?t=6082 > > > > > > (if not you can sign up for free at the URL above) > > > > > > > > > "Daniel Legarraga" wrote in message > > > news:4107fbd2_2@newsprd01... > > > > Any suggestion of where find Appendix A omitted in the book (just a > few > > > > blank pages...). > > > > > > > > Daniel > > > > > > > > "Jim Balding" escribió en el mensaje > > > > news:40f70381$1_3@newsprd01... > > > > > Just to clear the air. There was never an edition published for 5.5. > > > > There > > > > > was never a Revit 5.5. The Autodesk Press book was written during > the > > > 5.1 > > > > > release and updated for 6.0/6.1. The cover shot was the original > > image > > > > and > > > > > was distributed sometime in the 2nd quarter of 2003, and that is why > > > there > > > > > is so much confusion. > > > > > > > > > > Sorry - > > > > > > > > > > > > > > > "Daniel Legarraga" wrote in message > > > > > news:40f6b952$1_2@newsprd01... > > > > > > The title book is "Introducing and Implementing Autodesk Revit > 5.5" > > > > first > > > > > > edition June 29, 2004. > > > > > > I wonder if it's updated for Revit 6.1? or we will wait for the > > > edition > > > > > > 7/8/2004. > > > > > > On Amazon the book is priced $33.97. > > > > > > > > > > > > Daniel > > > > > > > > > > > > "Jim Balding" escribió en el mensaje > > > > > > news:40f458c9$1_2@newsprd01... > > > > > > > David - > > > > > > > > > > > > > > I was refering to the Autodesk Press book and it is out now. > > > > > > > > > > > > > > > > > > > > > > > > > > > > http://www.delmarlearning.com/Browse_CatalogDetail.asp?XXID=11963&ISBN=14018 50499. > > > > > > > Sorry for the confusion > > > > > > > > > > > > > > - JB > > > > > > > > > > > > > > > > > > > > > "David Driver" wrote in message > > > > > > > news:40ddf517$1_3@newsprd01... > > > > > > > > hmmm...still working on it even as we speak > > > > > > > > 7/8 might be a bit optimistic (only a bit...) > > > > > > > > David Driver, Contributing Editor CDV Revit Courseware Series > > > > > > > > > > > > > > > > "Jim Balding" wrote in message > > > > > > > > news:40ce63b4$1_1@newsprd01... > > > > > > > > > Stan - > > > > > > > > > > > > > > > > > > That book has now been updated for Revit 6 and will be out > > > > shortly. > > > > > > The > > > > > > > > > target date on the web site is now 7/8/2004. > > > > > > > > > > > > > > > > > > - JB > > > > > > > > > > > > > > > > > > "Stan Fowler" wrote in message > > > > > > > > > news:40bf9f82$1_2@newsprd01... > > > > > > > > > > I was wondering when some decent books will come out for > > > Revit. > > > > > > > > > > A book by Autodesk Press has been listed for a year and is > > > > titled > > > > > > > > > > Implementing Revit 5.5 but has not been published. I am > > > > surprised > > > > > > > > > > that Autodesk has not published a book yet. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >

[#4]

Jim, OK I open it with Adobe 6.0 and congratulation for the book, It's a very good job. Daniel . "Jim Balding" escribió en el mensaje news:410872b2$1_3@newsprd01... > The file has some PDF security features in place. You will need Acrobat > Reader 5.0 or greater to access the file. You can download 6.0 for free at > www.adobe.com > > HTH - > > - JB > > "Scott Davis" wrote in message > news:410841b7$1_3@newsprd01... > > I e-mailed it to you. Let me know if it works for you. > > > > "Daniel Legarraga" wrote in message > > news:410827df_1@newsprd01... > > > Scott, > > > I can not open and or save the file...any suggestion? > > > Daniel > > > > > > "Scott Davis" escribió en el mensaje > > > news:41080a5d_1@newsprd01... > > > > www.augi.com > > > > > > > > If you are a member of AUGI already, try: > > > > > > > > http://forums.augi.com/showthread.php?t=6082 > > > > > > > > (if not you can sign up for free at the URL above) > > > > > > > > > > > > "Daniel Legarraga" wrote in message > > > > news:4107fbd2_2@newsprd01... > > > > > Any suggestion of where find Appendix A omitted in the book (just a > > few > > > > > blank pages...). > > > > > > > > > > Daniel > > > > > > > > > > "Jim Balding" escribió en el mensaje > > > > > news:40f70381$1_3@newsprd01... > > > > > > Just to clear the air. There was never an edition published for > 5.5. > > > > > There > > > > > > was never a Revit 5.5. The Autodesk Press book was written during > > the > > > > 5.1 > > > > > > release and updated for 6.0/6.1. The cover shot was the original > > > image > > > > > and > > > > > > was distributed sometime in the 2nd quarter of 2003, and that is > why > > > > there > > > > > > is so much confusion. > > > > > > > > > > > > Sorry - > > > > > > > > > > > > > > > > > > "Daniel Legarraga" wrote in message > > > > > > news:40f6b952$1_2@newsprd01... > > > > > > > The title book is "Introducing and Implementing Autodesk Revit > > 5.5" > > > > > first > > > > > > > edition June 29, 2004. > > > > > > > I wonder if it's updated for Revit 6.1? or we will wait for the > > > > edition > > > > > > > 7/8/2004. > > > > > > > On Amazon the book is priced $33.97. > > > > > > > > > > > > > > Daniel > > > > > > > > > > > > > > "Jim Balding" escribió en el mensaje > > > > > > > news:40f458c9$1_2@newsprd01... > > > > > > > > David - > > > > > > > > > > > > > > > > I was refering to the Autodesk Press book and it is out now. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > http://www.delmarlearning.com/Browse_CatalogDetail.asp?XXID=11963&ISBN=14018 > 50499. > > > > > > > > Sorry for the confusion > > > > > > > > > > > > > > > > - JB > > > > > > > > > > > > > > > > > > > > > > > > "David Driver" wrote in message > > > > > > > > news:40ddf517$1_3@newsprd01... > > > > > > > > > hmmm...still working on it even as we speak > > > > > > > > > 7/8 might be a bit optimistic (only a bit...) > > > > > > > > > David Driver, Contributing Editor CDV Revit Courseware > Series > > > > > > > > > > > > > > > > > > "Jim Balding" wrote in message > > > > > > > > > news:40ce63b4$1_1@newsprd01... > > > > > > > > > > Stan - > > > > > > > > > > > > > > > > > > > > That book has now been updated for Revit 6 and will be out > > > > > shortly. > > > > > > > The > > > > > > > > > > target date on the web site is now 7/8/2004. > > > > > > > > > > > > > > > > > > > > - JB > > > > > > > > > > > > > > > > > > > > "Stan Fowler" wrote in message > > > > > > > > > > news:40bf9f82$1_2@newsprd01... > > > > > > > > > > > I was wondering when some decent books will come out for > > > > Revit. > > > > > > > > > > > A book by Autodesk Press has been listed for a year and > is > > > > > titled > > > > > > > > > > > Implementing Revit 5.5 but has not been published. I am > > > > > surprised > > > > > > > > > > > that Autodesk has not published a book yet. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >