Autodesk Revit Architecture

[#1]

I was wondering when some decent books will come out for Revit. A book by Autodesk Press has been listed for a year and is titled Implementing Revit 5.5 but has not been published. I am surprised that Autodesk has not published a book yet.

[#2]

Stan, For some very good training books on Revit check out http://www.cdvsystems.com/productcart/pc/viewCat_P.asp?idCategory=2 hope that helps... -- ;-) Cheers bladams "Stan Fowler" wrote in message news:40bf9f82$1_2@newsprd01... > I was wondering when some decent books will come out for Revit. > A book by Autodesk Press has been listed for a year and is titled > Implementing Revit 5.5 but has not been published. I am surprised > that Autodesk has not published a book yet. > >

[#3]

Thanks Bill, I wonder when they will update to 6.1. I tried to send them an email but it was returned - are they out of business??? Cheers "Bill Adams" wrote in message news:40c0094a$1_3@newsprd01... > Stan, > > For some very good training books on Revit check out > http://www.cdvsystems.com/productcart/pc/viewCat_P.asp?idCategory=2 > > hope that helps... > > -- > ;-) Cheers bladams > > "Stan Fowler" wrote in message > news:40bf9f82$1_2@newsprd01... > > I was wondering when some decent books will come out for Revit. > > A book by Autodesk Press has been listed for a year and is titled > > Implementing Revit 5.5 but has not been published. I am surprised > > that Autodesk has not published a book yet. > > > > > >

[#4]

Stan - That book has now been updated for Revit 6 and will be out shortly. The target date on the web site is now 7/8/2004. - JB "Stan Fowler" wrote in message news:40bf9f82$1_2@newsprd01... > I was wondering when some decent books will come out for Revit. > A book by Autodesk Press has been listed for a year and is titled > Implementing Revit 5.5 but has not been published. I am surprised > that Autodesk has not published a book yet. > >

[#5]

hmmm...still working on it even as we speak 7/8 might be a bit optimistic (only a bit...) David Driver, Contributing Editor CDV Revit Courseware Series "Jim Balding" wrote in message news:40ce63b4$1_1@newsprd01... > Stan - > > That book has now been updated for Revit 6 and will be out shortly. The > target date on the web site is now 7/8/2004. > > - JB > > "Stan Fowler" wrote in message > news:40bf9f82$1_2@newsprd01... > > I was wondering when some decent books will come out for Revit. > > A book by Autodesk Press has been listed for a year and is titled > > Implementing Revit 5.5 but has not been published. I am surprised > > that Autodesk has not published a book yet. > > > > > >

[#6]

David - I was refering to the Autodesk Press book and it is out now. http://www.delmarlearning.com/Browse_CatalogDetail.asp?XXID=11963&ISBN=1401850499. Sorry for the confusion - JB "David Driver" wrote in message news:40ddf517$1_3@newsprd01... > hmmm...still working on it even as we speak > 7/8 might be a bit optimistic (only a bit...) > David Driver, Contributing Editor CDV Revit Courseware Series > > "Jim Balding" wrote in message > news:40ce63b4$1_1@newsprd01... > > Stan - > > > > That book has now been updated for Revit 6 and will be out shortly. The > > target date on the web site is now 7/8/2004. > > > > - JB > > > > "Stan Fowler" wrote in message > > news:40bf9f82$1_2@newsprd01... > > > I was wondering when some decent books will come out for Revit. > > > A book by Autodesk Press has been listed for a year and is titled > > > Implementing Revit 5.5 but has not been published. I am surprised > > > that Autodesk has not published a book yet. > > > > > > > > > > > >

[#7]

The title book is "Introducing and Implementing Autodesk Revit 5.5" first edition June 29, 2004. I wonder if it's updated for Revit 6.1? or we will wait for the edition 7/8/2004. On Amazon the book is priced $33.97. Daniel "Jim Balding" escribió en el mensaje news:40f458c9$1_2@newsprd01... > David - > > I was refering to the Autodesk Press book and it is out now. > http://www.delmarlearning.com/Browse_CatalogDetail.asp?XXID=11963&ISBN=1401850499. > Sorry for the confusion > > - JB > > > "David Driver" wrote in message > news:40ddf517$1_3@newsprd01... > > hmmm...still working on it even as we speak > > 7/8 might be a bit optimistic (only a bit...) > > David Driver, Contributing Editor CDV Revit Courseware Series > > > > "Jim Balding" wrote in message > > news:40ce63b4$1_1@newsprd01... > > > Stan - > > > > > > That book has now been updated for Revit 6 and will be out shortly. The > > > target date on the web site is now 7/8/2004. > > > > > > - JB > > > > > > "Stan Fowler" wrote in message > > > news:40bf9f82$1_2@newsprd01... > > > > I was wondering when some decent books will come out for Revit. > > > > A book by Autodesk Press has been listed for a year and is titled > > > > Implementing Revit 5.5 but has not been published. I am surprised > > > > that Autodesk has not published a book yet. > > > > > > > > > > > > > > > > > > > >

[#8]

Just to clear the air. There was never an edition published for 5.5. There was never a Revit 5.5. The Autodesk Press book was written during the 5.1 release and updated for 6.0/6.1. The cover shot was the original image and was distributed sometime in the 2nd quarter of 2003, and that is why there is so much confusion. Sorry - "Daniel Legarraga" wrote in message news:40f6b952$1_2@newsprd01... > The title book is "Introducing and Implementing Autodesk Revit 5.5" first > edition June 29, 2004. > I wonder if it's updated for Revit 6.1? or we will wait for the edition > 7/8/2004. > On Amazon the book is priced $33.97. > > Daniel > > "Jim Balding" escribió en el mensaje > news:40f458c9$1_2@newsprd01... > > David - > > > > I was refering to the Autodesk Press book and it is out now. > > > http://www.delmarlearning.com/Browse_CatalogDetail.asp?XXID=11963&ISBN=1401850499. > > Sorry for the confusion > > > > - JB > > > > > > "David Driver" wrote in message > > news:40ddf517$1_3@newsprd01... > > > hmmm...still working on it even as we speak > > > 7/8 might be a bit optimistic (only a bit...) > > > David Driver, Contributing Editor CDV Revit Courseware Series > > > > > > "Jim Balding" wrote in message > > > news:40ce63b4$1_1@newsprd01... > > > > Stan - > > > > > > > > That book has now been updated for Revit 6 and will be out shortly. > The > > > > target date on the web site is now 7/8/2004. > > > > > > > > - JB > > > > > > > > "Stan Fowler" wrote in message > > > > news:40bf9f82$1_2@newsprd01... > > > > > I was wondering when some decent books will come out for Revit. > > > > > A book by Autodesk Press has been listed for a year and is titled > > > > > Implementing Revit 5.5 but has not been published. I am surprised > > > > > that Autodesk has not published a book yet. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >

[#9]

Any suggestion of where find Appendix A omitted in the book (just a few blank pages...). Daniel "Jim Balding" escribió en el mensaje news:40f70381$1_3@newsprd01... > Just to clear the air. There was never an edition published for 5.5. There > was never a Revit 5.5. The Autodesk Press book was written during the 5.1 > release and updated for 6.0/6.1. The cover shot was the original image and > was distributed sometime in the 2nd quarter of 2003, and that is why there > is so much confusion. > > Sorry - > > > "Daniel Legarraga" wrote in message > news:40f6b952$1_2@newsprd01... > > The title book is "Introducing and Implementing Autodesk Revit 5.5" first > > edition June 29, 2004. > > I wonder if it's updated for Revit 6.1? or we will wait for the edition > > 7/8/2004. > > On Amazon the book is priced $33.97. > > > > Daniel > > > > "Jim Balding" escribió en el mensaje > > news:40f458c9$1_2@newsprd01... > > > David - > > > > > > I was refering to the Autodesk Press book and it is out now. > > > > > > http://www.delmarlearning.com/Browse_CatalogDetail.asp?XXID=11963&ISBN=1401850499. > > > Sorry for the confusion > > > > > > - JB > > > > > > > > > "David Driver" wrote in message > > > news:40ddf517$1_3@newsprd01... > > > > hmmm...still working on it even as we speak > > > > 7/8 might be a bit optimistic (only a bit...) > > > > David Driver, Contributing Editor CDV Revit Courseware Series > > > > > > > > "Jim Balding" wrote in message > > > > news:40ce63b4$1_1@newsprd01... > > > > > Stan - > > > > > > > > > > That book has now been updated for Revit 6 and will be out shortly. > > The > > > > > target date on the web site is now 7/8/2004. > > > > > > > > > > - JB > > > > > > > > > > "Stan Fowler" wrote in message > > > > > news:40bf9f82$1_2@newsprd01... > > > > > > I was wondering when some decent books will come out for Revit. > > > > > > A book by Autodesk Press has been listed for a year and is titled > > > > > > Implementing Revit 5.5 but has not been published. I am surprised > > > > > > that Autodesk has not published a book yet. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >

[#10]

www.augi.com If you are a member of AUGI already, try: http://forums.augi.com/showthread.php?t=6082 (if not you can sign up for free at the URL above) "Daniel Legarraga" wrote in message news:4107fbd2_2@newsprd01... > Any suggestion of where find Appendix A omitted in the book (just a few > blank pages...). > > Daniel > > "Jim Balding" escribió en el mensaje > news:40f70381$1_3@newsprd01... > > Just to clear the air. There was never an edition published for 5.5. > There > > was never a Revit 5.5. The Autodesk Press book was written during the 5.1 > > release and updated for 6.0/6.1. The cover shot was the original image > and > > was distributed sometime in the 2nd quarter of 2003, and that is why there > > is so much confusion. > > > > Sorry - > > > > > > "Daniel Legarraga" wrote in message > > news:40f6b952$1_2@newsprd01... > > > The title book is "Introducing and Implementing Autodesk Revit 5.5" > first > > > edition June 29, 2004. > > > I wonder if it's updated for Revit 6.1? or we will wait for the edition > > > 7/8/2004. > > > On Amazon the book is priced $33.97. > > > > > > Daniel > > > > > > "Jim Balding" escribió en el mensaje > > > news:40f458c9$1_2@newsprd01... > > > > David - > > > > > > > > I was refering to the Autodesk Press book and it is out now. > > > > > > > > > > http://www.delmarlearning.com/Browse_CatalogDetail.asp?XXID=11963&ISBN=1401850499. > > > > Sorry for the confusion > > > > > > > > - JB > > > > > > > > > > > > "David Driver" wrote in message > > > > news:40ddf517$1_3@newsprd01... > > > > > hmmm...still working on it even as we speak > > > > > 7/8 might be a bit optimistic (only a bit...) > > > > > David Driver, Contributing Editor CDV Revit Courseware Series > > > > > > > > > > "Jim Balding" wrote in message > > > > > news:40ce63b4$1_1@newsprd01... > > > > > > Stan - > > > > > > > > > > > > That book has now been updated for Revit 6 and will be out > shortly. > > > The > > > > > > target date on the web site is now 7/8/2004. > > > > > > > > > > > > - JB > > > > > > > > > > > > "Stan Fowler" wrote in message > > > > > > news:40bf9f82$1_2@newsprd01... > > > > > > > I was wondering when some decent books will come out for Revit. > > > > > > > A book by Autodesk Press has been listed for a year and is > titled > > > > > > > Implementing Revit 5.5 but has not been published. I am > surprised > > > > > > > that Autodesk has not published a book yet. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >