Autodesk Revit Architecture

[#1]

Hello, Im haiving problems witn my rendering,  yesturday everithing was working fine but today everytimie i set rendering quality higher than draft, Revit either fails to render (rendering area goes black) or the pc crashes and i get bluescreen. 

[#2]

probably not a revit issue

thats a hardware problem most likely

your probably overheating the computer

[#3]

I dont think so, as i said everything was warking fine. It goes to 10% of render in less than 10 seconds then it thinks a bit  and it goes to 100% full complete render which is black...

My pc is intel i7 3.5ghz, 8gb ram and gefoce gtx680. I checked out the temperatures during the process and its slightly above 60.

I got message from revit: Unknown error occured...

[#4]

Hi

I experienced  such a thing time ago. But after restarting my computer twice, everything turned back fine.
Verify your graphics card, maybe it is not good enough for such mission!!!

[#5]

have you looked up the blue screen error

that will tell what the problem is

its not going to be revit

[#6]

go by this guide: http://www.pcworld.com/article/2023665/anatomy-of-a-pc-crash-7-scenarios-and-how-to-avoid-them.html

[#7]

It is not happening in other projects, only in this one, blue screens are not showing up anymore, it just doesnt render.