Modify tab out of Place

[Bill.Knittle]

Last night I was editing an In-Place family and for some reason, Revit did not exit the In-Place Editor properly. The Modify tab was kicked all the way to the left on the ribbon to precede the Home tab. Is there a way to reset the ribbon to its default state because, the contextual tabs react to the new location of the Modify tab? I have attached an image.

I am using a M6400 Dell Precison Laptop with Win 7 64 and SP1 has been installed to Revit Architecture

.

[ryan.duell]

There are 2 approaches to resolve this:

1.  You can rearrange tabs while holding the CTRL key:

http://revitclinic.typepad.com/my_weblog/2010/02/ui-tips.html

2.  You can reset the UI back to default [which will reset any QAT or ribbon customization]:

http://usa.autodesk.com/getdoc/id=TS14880949

Hope this helps!

There are 2 approaches to resolve this:

1.  You can rearrange tabs while holding the CTRL key:

http://revitclinic.typepad.com/my_weblog/2010/02/ui-tips.html

2.  You can reset the UI back to default [which will reset any QAT or ribbon customization]:

http://usa.autodesk.com/getdoc/id=TS14880949

Hope this helps!

[Bill.Knittle · Accepted solution]

Ryan,

Thanks for the tips. Ctrl+Drag worked great!!!

[miss_metz]

hi there, the link doesn't work anymore - do you have another link to the same, that works?

thank you...