Autodesk Mechanical Desktop

[#1]

Welcome to the NEW Autodesk Mechanical Desktop v4 Discussion
Group, news://adesknews.autodesk.com/autodesk.mcad.mdt4.support.

This group has been created to discuss Version 4 of Mechanical
Desktop. If you have technical questions, this is the place to
ask them. More detailed information on this product is available
at the Autodesk website http://www.autodesk.com.

This discussion group will be moderated by MCAD Development and
Product Support staff. Any and all marketing questions must be
directed to news://adesknews.autodesk.com/autodesk.mcad.marketing
where non-technical MCAD questions are supported.

You will also find discussions of related and previous versions
of Mechanical Desktop at
http://www.autodesk.com/support/discsgrp/mech.htm.

The Autodesk sponsored discussion groups are intended to be
constructive, informative, and helpful for our customers and
industry partners. Please refer to the Autodesk Discussion Group
Questions & Answers, Etiquette Tips and Ground Rules at
http://www.autodesk.com/support/discsgrp/discqa.htm.

Please post messages that have file attachments to the
customer-files group at
news://adesknews.autodesk.com/autodesk.autocad.customer-files.

For information on other Autodesk discussion groups please see
http://www.autodesk.com/discussion.
--
Anne Brown
Autodesk Sysop
WW Support & Services, Autodesk
Discussion Q&A: http://www.autodesk.com/discussion

[#2]

we need a group for A2K Mechanical w/ w/o PP only

Anne Brown wrote:

> Welcome to the NEW Autodesk Mechanical Desktop v4 Discussion
> Group, news://adesknews.autodesk.com/autodesk.mcad.mdt4.support.
>
> This group has been created to discuss Version 4 of Mechanical
> Desktop. If you have technical questions, this is the place to
> ask them. More detailed information on this product is available
> at the Autodesk website http://www.autodesk.com.
>
> This discussion group will be moderated by MCAD Development and
> Product Support staff. Any and all marketing questions must be
> directed to news://adesknews.autodesk.com/autodesk.mcad.marketing
> where non-technical MCAD questions are supported.
>
> You will also find discussions of related and previous versions
> of Mechanical Desktop at
> http://www.autodesk.com/support/discsgrp/mech.htm.
>
> The Autodesk sponsored discussion groups are intended to be
> constructive, informative, and helpful for our customers and
> industry partners. Please refer to the Autodesk Discussion Group
> Questions & Answers, Etiquette Tips and Ground Rules at
> http://www.autodesk.com/support/discsgrp/discqa.htm.
>
> Please post messages that have file attachments to the
> customer-files group at
> news://adesknews.autodesk.com/autodesk.autocad.customer-files.
>
> For information on other Autodesk discussion groups please see
> http://www.autodesk.com/discussion.
> --
> Anne Brown
> Autodesk Sysop
> WW Support & Services, Autodesk
> Discussion Q&A: http://www.autodesk.com/discussion

[#3]

Ronald -

I will of course pass on the request but somehow doubt the
newsgroups will be refined down that far in subsets.
--
Anne Brown
Autodesk Sysop/Moderator
Discussion Q&A: http://www.autodesk.com/discussion

"Ronald A. Lau, E.I." wrote:
>
> we need a group for A2K Mechanical w/ w/o PP only

[#4]

I asked as I said I would and got back the answer this morning.
For the current time, the layout of the MCAD discussion groups
will stay as they are.
--
Anne Brown
Autodesk Sysop/Moderator
Discussion Q&A: http://www.autodesk.com/discussion

"Ronald A. Lau, E.I." wrote:
>
> we need a group for A2K Mechanical w/ w/o PP only
>

[#5]

Anne

I understand you have done what you can, but it truly is counter productive
with a good 20 to 30 % of the questions not applying in the least to the
rest of the newsgroup. Sometimes it takes a couple three exchanges before
you find out you have to say "I don't know I don't have that product"

What other newsgroup has to deal with this amount of off topic questions?

--
Kent Keller
Strobe Data Inc.
www.strobedata.com

No sense being pessimistic.
It wouldn't work anyway.

"Anne Brown" wrote in message
news:389B063F.EFBF3FA5@autodesk.com...
> I asked as I said I would and got back the answer this morning.
> For the current time, the layout of the MCAD discussion groups
> will stay as they are.
> --
> Anne Brown
> Autodesk Sysop/Moderator
> Discussion Q&A: http://www.autodesk.com/discussion
>
> "Ronald A. Lau, E.I." wrote:
> >
> > we need a group for A2K Mechanical w/ w/o PP only
> >

[#6]

I have also shown my wish for a AM2K group, but I guess there is not enough
of us to make a difference, must of the messages in this group relate MDT,
so we have to go thru 100 messages relating to MDT before we find one
related to AM2K. Guess we lose.
"Anne Brown" wrote in message
news:389A2EC0.65AF979D@autodesk.com...
> Ronald -
>
> I will of course pass on the request but somehow doubt the
> newsgroups will be refined down that far in subsets.
> --
> Anne Brown
> Autodesk Sysop/Moderator
> Discussion Q&A: http://www.autodesk.com/discussion
>
>
> "Ronald A. Lau, E.I." wrote:
> >
> > we need a group for A2K Mechanical w/ w/o PP only