Autodesk Inventor

[#1]

Hi Reg,

No problem. Hope that works out. Sorry I forgot to address you in my post.

-Shiva Sundaram

Inventor Development

[#2]

so now i have an existing assembly idw and i added this part i downloaded from a vendor site and it does not show up on the idw views. how do i fix this?

[#3]

Hi Scott,

Does it appear if you create a new view? If so, then you may want to check to see if the drawing view (which doesnt show the part) has Associative DV = ON (view dialog has a checkbox). If its unchecked, you click on that to make the view associative, the part should become visible by default whenever any part is added to the assembly.

OR you can re-apply design view to an existing drawing and right click context menu.

OR you can select the part from the browser and turn visibility ON (if its off)

If new drawing views also do not  show that, then it might be a problem with the part and I would be happy to take a look at if you want to email it to me - sundarsATautodeskDOTcom

Thanks

-Shiva Sundaram

Inventor Development

[#4]

it shows it as on in my idw browser and if i create a new view of the same it shows up. i got it to show up in other views so just that top level assy idw. i can work around it.

thanks

[#5]

Hi

Back again. How do you set the view rep for Assemblies?

The parts have the surface switched off, the surfaces are not visible in the assemblies, you can't acces the suface in the assembly tree either, but yet they all come through in the IDW?

[#6]

Hi Reg,

Did you try creating a drawing view with the View Representation CHECKED. The view create/edit dialog should contain a checkbox and if you click on it, it will use the view rep from the assembly document. Make sure that when you create or edit the drawing view, you select the view rep (in the list) which corresponds to the one which has surfaces off.

I know it's a little confusing and change in behavior....

Thanks and hope that helps....

-Shiva Sundaram

Inventor Development

[#7]

I don't think this is just "confusing" or a "change in behaviour".  This is a major addition to the work load and I cannot understand what has possessed AD to hobble its users this way.

[#8]

Thanks Shiva

I will try the different workflow.

I gave the workflow a quick test, and guess what, it all worked 100%

The Assiciative check box was not ticked, on that particular drawing, I will keep you updated if find anything strange.

Applying "All surfaces" view rep is still quite painfull.

tx