i have 2 questions in which i need some help please
1. How do i place holes in the 2 rails at centre height..the holes placed in the rails so as to place bolt through both rails...i do not know how to place these holes around the curved rails
2. Can these rails be made using Sheet Metal tools.I would like to unfold if possible...not much experience in sheet Metal
All help appreciated
Terry Close
IV-2013
Curve driven pattern (Rectangular Pattern)
read this http://home.pct.edu/~jmather/SkillsUSA%20University.pdf
Yes the parts can be made with sheet metal tools (separately).
3D Sketch1 is not needed.
Work Plane2 is a duplication of Work Plane1.
I'll try to come back later and show sheet metal solution.
After thinking about it - no curve driven pattern is needed as this is a sheet metal part.
My solution will have a Contoured Flange, Rolled Flange and a Cut - Across Bend.