Autodesk Inventor

[#1]

See attached dataset.

If you change from "3 - WITH Rounds" to "6 - WITHOUT Rounds", some elements
in the pattern are not being excluded.

--
T. Ham
CAD Automation & Systems Administrator
CDS Engineering BV

HP xw4300 Workstation
Dual Pentium XEON 3.6 Ghz
4 GB SDRAM
NVIDIA QUADRO FX 3450/4000 SDI (Driver = 6.14.10.9185)
250 GB SEAGATE SATA Hard Disc
3Com Gigabit NIC

Windows XP Professional SP2
Autodesk Inventor Series 10 SP3a
Autodesk Inventor Suite 2008 SP1
--

[#2]

And a videoclip showing the problem...

--
T. Ham
CAD Automation & Systems Administrator
CDS Engineering BV

HP xw4300 Workstation
Dual Pentium XEON 3.6 Ghz
4 GB SDRAM
NVIDIA QUADRO FX 3450/4000 SDI (Driver = 6.14.10.9185)
250 GB SEAGATE SATA Hard Disc
3Com Gigabit NIC

Windows XP Professional SP2
Autodesk Inventor Series 10 SP3a
Autodesk Inventor Suite 2008 SP1
--

[#3]

I "solved" this issue by setting the number elements of the pattern to "1"
when it is being suppressed (excluded).

But I still think that the iAssembly is not correctly updating when you
switch from one element to another...

--
T. Ham
CAD Automation & Systems Administrator
CDS Engineering BV

HP xw4300 Workstation
Dual Pentium XEON 3.6 Ghz
4 GB SDRAM
NVIDIA QUADRO FX 3450/4000 SDI (Driver = 6.14.10.9185)
250 GB SEAGATE SATA Hard Disc
3Com Gigabit NIC

Windows XP Professional SP2
Autodesk Inventor Series 10 SP3a
Autodesk Inventor Suite 2008 SP1
--

[#4]

I had a similar problem:

http://discussion.autodesk.com/thread.jspa?messageID=5772844

[#5]

I am having the same issue. Attached is a picture showing the pattern that is excluded and the pattern still showing up in the model. When I look at the BOM the excluded parts are not there and if I make a drawing the excluded parts do not show up either. Has anyone figured out what the problem is?

Regards,

N-

[#6]

I'm not sure this is the same issue, but I have an iassembly stairway modeled that acts the same way updating the iassembly.
But when placing the iassembly child in an assembly it always depicts the correct assembly.

So, what I am trying to say is that my iassemblies do not update correctly until it is placed into an assembly.

HTH
kp

btw: IV11

[#7]

When did iassemblies\iparts start working?

[#8]

Teum,

I have verified the behavior on R2008. But, I am not able to reproduce it on R2009. It seems to work there.

Johnson Shiue
Inventor QA Tech Lead
Autodesk