Re: cut and paste

JDMather · ‎04-20-2006

Cadmanto wrote:
I have tried numerous time to select a part in the assembly tree and do a ctrl-C and then a ctrl-V

Didn't read through this entire thread - I assume you have found out that you can Ctrl drag copies of parts from assemby tree to graphics window.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2013 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2014 Edu 64-bit
GeForce GTX 560M i7-2670QM @ 2.2GHz 8GB RAM
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
http://www.autodesk.com/edcommunity
Still waiting for -Draft option on any Rib feature.

Curtis_Waguespack · ‎03-08-2006

Cadmanto wrote:

I have tried numerous time to select a part in the assembly tree and do a ctrl-C and then a ctrl-V
and it has never worked for me.

Hi Cadmanto,

If you select the target part in the browser and press CTRL + C on the keyboard, then click in the graphics area and then press CTRL + V on the keyboard it should work. Keep in mind that the click in the graphics area provides the insertion point as well.

I hope this helps.
Best of luck to you in all of your Inventor pursuits,
Curtis
http://inventortrenches.blogspot.com

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

stanislav.sedlak · ‎12-08-2011

Hi,

you are right, I see the same behaviour on my machine.

I have logged an issue (DID1489576 ) for this topic to our internal database so people from Autodesk can take a look.

Thanks for reporting this issue!

Stanislav Sedlak

Autodesk