Using Split Command

rsagan85 · ‎09-18-2012

I am wondering how many times you can use split command on one part?

I have never used split command before.

if you look at the image below, i would like to split this into 4 pieces, and looking for the quickest and the way that makes the most sense way to do it.

Also another side question. is there anywhere i can sign up for free webinars that are good to attend on inventor?

JDMather · ‎04-20-2006

I am not aware of any limitations on number of Split features

- but I suspect there is an far easier technique in this case.

(You will want to become familiar with mutli-body solids techniques or Frame Generator).

http://au.autodesk.com/?nd=classes

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2013 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2013 SP 1.1 Edu 64-bit
GeForce GTX 560M i7-2670QM @ 2.2GHz 8GB RAM
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
http://www.autodesk.com/edcommunity
Still waiting for -Draft option on any Rib feature.

Autodesk Inventor

Using Split Command

Re: Using Split Command