Autodesk Inventor

[#1]

I've suggest the same thing (same wording even) a number of times...

--
Sean Dotson, PE
http://www.sdotson.com
Check the Inventor FAQ for most common questions
http://www.sdotson.com/faq.html
-----------------------------------------
"Ron Crain" wrote in message
news:A93E3B42581C925A931D5E4169578222@in.WebX.maYIadrTaRb...
> Useless, yes. If only they allowed selective "get model dimensions".
>
>
> "Sean Dotson" wrote in message
> news:BC303895943742BAD0005D066A155905@in.WebX.maYIadrTaRb...
> > You know what Ron. I was wrong. I was thinking about hole notes. That
you
> > can do. Regular dimensions are a no go. Which is why I find them
useless
> > in the state they are now. As I said before I understand they need to
> start
> > somewhere but right now they are useless..
> >
> > --
> > Sean Dotson, PE
> > http://www.sdotson.com
> > Check the Inventor FAQ for most common questions
> > http://www.sdotson.com/faq.html
> > -----------------------------------------
> > "Ron Crain" wrote in message
> > newsA59CD1C512D10E83925A32A990BD815@in.WebX.maYIadrTaRb...
> > >
> > > "Sean Dotson" wrote in message
> > > news:FD54CB4DA8E05CD41E6ED1D813273FB0@in.WebX.maYIadrTaRb...
> > > > They do need to work on the way tolerances are passed to the IDW
> > however.
> > > > Right now unless you use "Get Model Dims" which I think only <1% of
> > > people
> > > > do (I certainly don't) it's several clicks to get them to show up
> > > > correctly..
> > >
> > > Sean, are you saying that you can get tolerances to display if you
don't
> > use
> > > "Get Model DIms"?
> > >
> > > How?
> > >
> > >
> >
> >
>
>