Sweep or create 3d project to surface?

blburson · ‎07-17-2009

Hello users,

I'm racking my brain try to figure out how to do this. Picture this, a tubular feature that has a path that runs along the circumference and turns linnear. A path thats .3125 in diameter. I attached a file that shows a hand sketch with this post but I can't tell if it will show up. If anyone can offer help, it would be greatly appreciated. thank you.

JDMather · ‎04-20-2006

3D sketch - wrap to face

Sweep with guide surface.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2013 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2013 SP 1.1 Edu 64-bit
GeForce GTX 560M i7-2670QM @ 2.2GHz 8GB RAM
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
http://www.autodesk.com/edcommunity
Still waiting for -Draft option on any Rib feature.

blburson · ‎07-17-2009

Awesome, it worked! Thank you so much.

Autodesk Inventor

Sweep or create 3d project to surface?

Re: Sweep or create 3d project to surface?

Re: Sweep or create 3d project to surface?