Re: Sheet metal Problem

rdyson · ‎04-11-2005

Here's my attempt, at least the first half. Not perfect, but might be close enough after some tweaking.

JDMather · ‎04-20-2006

I worked out a solution today. I will post it tomorrow if I remember.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2013 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2014 Edu 64-bit
GeForce GTX 560M i7-2670QM @ 2.2GHz 8GB RAM
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
http://www.autodesk.com/edcommunity
Still waiting for -Draft option on any Rib feature.

JDMather · ‎04-20-2006

I could not find a way other than face-by-face.

The attached was done in student version - so examine the technique and then delete.

Pull down the red End of Part marker step by step.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2013 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2014 Edu 64-bit
GeForce GTX 560M i7-2670QM @ 2.2GHz 8GB RAM
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
http://www.autodesk.com/edcommunity
Still waiting for -Draft option on any Rib feature.

aaddekrom · ‎02-18-2011

This is great ! Just faces.

Thank you very much.

aaddekrom · ‎02-18-2011

Thanks for your help, it looks ok, but JDMathers solution is more straightforward.