Sheet Metal Flange only on partial edge

j_berry · ‎11-15-2012

How can I define the length of a flange in a sheet metal part? In other words, I would like a flange to run a definitive length along the edge of a part, not the entire edge of a part.

I apologize if this has been asked before. I did a brief search of the forum and could not find a solution.

_____________________________________________________________
Autodesk Product Design Suite Ultimate 2013 | Windows 7 Professional 64 bit, SP1
Dell Precision T7600 | Two (2) Intel Xeon CPU E5-2630 @ 2.3GHz (12 cores, 24 logical processors) | 32 GB RAM

JDMather · ‎04-20-2006

Attach your file here.

Expand the dialog box and set Width or desired Offset distance from each end.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2013 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2013 SP 1.1 Edu 64-bit
GeForce GTX 560M i7-2670QM @ 2.2GHz 8GB RAM
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
http://www.autodesk.com/edcommunity
Still waiting for -Draft option on any Rib feature.

Autodesk Inventor

Sheet Metal Flange only on partial edge

Re: Sheet Metal Flange only on partial edge