Set features to be invisible when create sketch after those 3D features

lis_wang · ‎11-26-2003

Is there any way to set features to be invisible when create sketch after those 3D features so as to make the sketch more easy to see?

Thanks

JDMather · ‎04-20-2006

F7 if the geometry is behind the sketch.

Or right click on Solid Body and turn off Visibility.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2013 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2014 Edu 64-bit
GeForce GTX 560M i7-2670QM @ 2.2GHz 8GB RAM
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
http://www.autodesk.com/edcommunity
Still waiting for -Draft option on any Rib feature.

lis_wang · ‎11-26-2003

Yes, However, if the sketch is between a few 3D features? How?

Thanks. I received many help from you and I am really appreciate it.

JDMather · ‎04-20-2006

If F7 doesn't make it clear enough and turning off Visibility of the part is not a good option, then maybe rolling up the end of part marker to a location before the feature(s) might work. (I use all three of these as appropriate).

2013 (and I think 201) also allow Section Views and View Representations at the part level (used to be only assembly).

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2013 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2014 Edu 64-bit
GeForce GTX 560M i7-2670QM @ 2.2GHz 8GB RAM
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
http://www.autodesk.com/edcommunity
Still waiting for -Draft option on any Rib feature.

Autodesk Inventor

Set features to be invisible when create sketch after those 3D features

Re: Set features to be invisible when create sketch after those 3D features

Re: Set features to be invisible when create sketch after those 3D features

Re: Set features to be invisible when create sketch after those 3D features