Autodesk Inventor

[#1]

I commonly need to select frame generator members to change visibility, etc. but since they are all contained in a single frame I need to do this in the browser.  This can be difficult because I need to zoom in on the screen while having the section of the browser visible on screen at the same time.  Is there a way that I can individually select each member in the assembly without using the browser?

[#2]

Set your selection Filter to Part Priority.

Also - it looks to me like you have a lot of repeated dimensions - I prefer to use equal (=) constraints instead.

You can window or crossing window select and hit = on the keyboard.

[#3 · Accepted solution]

Thanks.  When you say repeated dimensions are you referring to the top area where the grill bars are located?  I use a formula here (49.438) driven dimension then reference each space divided by the number required.

How would I use the equal constraint?  Highlight select and then hit =  I'll try it.  Thanks.

[#4]

I generally have zero dulpicated dimensions unless there is a chance that I know a couple of dimensions might need to be edited independently as the design changes.

You also have a bunch of 90° dimensions rather than Perpendicular constraints.