Autodesk Inventor
Reply
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic to the Top
- Bookmark
- Subscribe
- Printer Friendly Page
*Hoder, Dave
Miter Folds
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
123 Views, 15 Replies
02-12-2003 06:05 AM
Has anyone figured out how to do a miter fold yet? If you don't know what
that is, picture this:
Take a strip of material say 4"x48"x1/2", chamfer the 2 short ends @ 45 deg,
cut 3 45deg v-grooves at equal spacing & leave .030" material at the bottom
of the groove. Now fold the machined part into a rectangle. Maybe one of you
sheet metal gurus can help me here.
Thanx, Dave
that is, picture this:
Take a strip of material say 4"x48"x1/2", chamfer the 2 short ends @ 45 deg,
cut 3 45deg v-grooves at equal spacing & leave .030" material at the bottom
of the groove. Now fold the machined part into a rectangle. Maybe one of you
sheet metal gurus can help me here.
Thanx, Dave
*Keller, Kent
Re: Miter Folds
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
02-12-2003 06:48 AM in reply to:
*Hoder, Dave
I would think it could be modeled without to much hair pulling, but I doubt you will be
able to unfold it.
--
Kent
Member of the Autodesk Discussion Forum Moderator Program
"Dave Hoder" wrote in message
news:963038B2A0AF04CE775DF5DE9F07DA28@in.WebX.maYI
> Has anyone figured out how to do a miter fold yet? If you don't know what
> that is, picture this:
> Take a strip of material say 4"x48"x1/2", chamfer the 2 short ends @ 45 deg,
> cut 3 45deg v-grooves at equal spacing & leave .030" material at the bottom
> of the groove. Now fold the machined part into a rectangle. Maybe one of you
> sheet metal gurus can help me here.
> Thanx, Dave
>
>
able to unfold it.
--
Kent
Member of the Autodesk Discussion Forum Moderator Program
"Dave Hoder"
news:963038B2A0AF04CE775DF5DE9F07DA28@in.WebX.maYI
> Has anyone figured out how to do a miter fold yet? If you don't know what
> that is, picture this:
> Take a strip of material say 4"x48"x1/2", chamfer the 2 short ends @ 45 deg,
> cut 3 45deg v-grooves at equal spacing & leave .030" material at the bottom
> of the groove. Now fold the machined part into a rectangle. Maybe one of you
> sheet metal gurus can help me here.
> Thanx, Dave
>
>
*Hoder, Dave
Re:
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
02-12-2003 07:37 AM in reply to:
*Hoder, Dave
I need to show it as one part (with the original part size) in the BOM &
unfold it for machining. Right now I'm faking it by making a drived part
from a dummy unfolded assy & hiding the separate parts in the Parts List.
This won't be a good idea though as soon as we start pulling data directly
from assemblies. Any ideas?
unfold it for machining. Right now I'm faking it by making a drived part
from a dummy unfolded assy & hiding the separate parts in the Parts List.
This won't be a good idea though as soon as we start pulling data directly
from assemblies. Any ideas?
*Bliss, Charles
Re: Miter Folds
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
02-12-2003 11:46 AM in reply to:
*Hoder, Dave
Create flanges using the offset option. make the offset longer then the
flange width. This will leave large gaps between your flanges. Use the
corner tool to close the flanges. This will give you a mitered corner.
I have placed an example in Customer Files.
Dave Hoder wrote:
>Has anyone figured out how to do a miter fold yet? If you don't know what
>that is, picture this:
>Take a strip of material say 4"x48"x1/2", chamfer the 2 short ends @ 45 deg,
>cut 3 45deg v-grooves at equal spacing & leave .030" material at the bottom
>of the groove. Now fold the machined part into a rectangle. Maybe one of you
>sheet metal gurus can help me here.
>Thanx, Dave
>
>
>
>
flange width. This will leave large gaps between your flanges. Use the
corner tool to close the flanges. This will give you a mitered corner.
I have placed an example in Customer Files.
Dave Hoder wrote:
>Has anyone figured out how to do a miter fold yet? If you don't know what
>that is, picture this:
>Take a strip of material say 4"x48"x1/2", chamfer the 2 short ends @ 45 deg,
>cut 3 45deg v-grooves at equal spacing & leave .030" material at the bottom
>of the groove. Now fold the machined part into a rectangle. Maybe one of you
>sheet metal gurus can help me here.
>Thanx, Dave
>
>
>
>
*Keller, Kent
Re:
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
02-12-2003 01:12 PM in reply to:
*Hoder, Dave
I could easily be wrong, but I don't think that is what he is after. The
words 45deg v-groves and Machined parts makes me think he wants a weakening
grove to make the fold with.
--
Kent Keller
Member of the Autodesk Discussion Forum Moderator Program
http://www.MyMcad.com/KWiK/Mcad.htm
"Charles Bliss" wrote in message
news:3E4B1502.5000604@cbliss.com...
> Create flanges using the offset option.
>
>
> Dave Hoder wrote:
:
> >Take a strip of material say 4"x48"x1/2", chamfer the 2 short ends @ 45
deg,
> >cut 3 45deg v-grooves at equal spacing & leave .030" material at the
bottom
> >of the groove. Now fold the machined part
words 45deg v-groves and Machined parts makes me think he wants a weakening
grove to make the fold with.
--
Kent Keller
Member of the Autodesk Discussion Forum Moderator Program
http://www.MyMcad.com/KWiK/Mcad.htm
"Charles Bliss"
news:3E4B1502.5000604@cbliss.com...
> Create flanges using the offset option.
>
>
> Dave Hoder wrote:
:
> >Take a strip of material say 4"x48"x1/2", chamfer the 2 short ends @ 45
deg,
> >cut 3 45deg v-grooves at equal spacing & leave .030" material at the
bottom
> >of the groove. Now fold the machined part
*Hendey, Matt
Re: Miter Folds
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
02-12-2003 08:38 PM in reply to:
*Hoder, Dave
Can you post what you have in CF?
Matt
Matt
*Keller, Kent
Re:
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
02-13-2003 01:11 AM in reply to:
*Hoder, Dave
Matt
If you are talking to Charles... He did! 8^)
--
Kent
Member of the Autodesk Discussion Forum Moderator Program
"Matt Hendey" wrote in message
news:f1431d6.4@WebX.maYIadrTaRb...
> Can you post what you have in CF?
>
> Matt
>
>
>
If you are talking to Charles... He did! 8^)
--
Kent
Member of the Autodesk Discussion Forum Moderator Program
"Matt Hendey"
news:f1431d6.4@WebX.maYIadrTaRb...
> Can you post what you have in CF?
>
> Matt
>
>
>
*Hendey, Matt
Re:
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
02-13-2003 03:10 AM in reply to:
*Hoder, Dave
No to Dave, Sorry. I'm interested in what he is trying to do. I tried
creating the part from the description he gave but if I got it right, I
can't see the reason for building a part that way. No that there isn't one.
Matt
"Kent Keller" wrote in message
news:1B117C461A3FF93F56B7ACC5468940BB@in.WebX.maYI
> Matt
>
> If you are talking to Charles... He did! 8^)
>
> --
> Kent
> Member of the Autodesk Discussion Forum Moderator Program
>
>
> "Matt Hendey" wrote in message
> news:f1431d6.4@WebX.maYIadrTaRb...
> > Can you post what you have in CF?
> >
> > Matt
> >
> >
> >
>
>
creating the part from the description he gave but if I got it right, I
can't see the reason for building a part that way. No that there isn't one.
Matt
"Kent Keller"
news:1B117C461A3FF93F56B7ACC5468940BB@in.WebX.maYI
> Matt
>
> If you are talking to Charles... He did! 8^)
>
> --
> Kent
> Member of the Autodesk Discussion Forum Moderator Program
>
>
> "Matt Hendey"
> news:f1431d6.4@WebX.maYIadrTaRb...
> > Can you post what you have in CF?
> >
> > Matt
> >
> >
> >
>
>
*Hoder, Dave
Re:
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
02-14-2003 12:46 AM in reply to:
*Hoder, Dave
The part is in CF called Miter Fold. (I just made an example shape, not a
sheet metal part) This is a common manufacturing process in the furniture /
woodworking industry where we are working with a piece of wood covered with
a colored paper. We cut thru the wood & leave the paper, then fold the whole
thing together. This makes for a cleaner seam & less assemby time.
Thanks for having a look.
sheet metal part) This is a common manufacturing process in the furniture /
woodworking industry where we are working with a piece of wood covered with
a colored paper. We cut thru the wood & leave the paper, then fold the whole
thing together. This makes for a cleaner seam & less assemby time.
Thanks for having a look.
*Caldwell, Larry
Re:
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
02-14-2003 12:53 AM in reply to:
*Hoder, Dave
I did one of those by ... cheating? ... making a face that would bend then
add the rest in an assembly because it needed to be shown both flat and
folded.
~Larry
"Dave Hoder" wrote in message
news:F82FB0D513739B07DFE1A95A4327C751@in.WebX.maYI
> The part is in CF called Miter Fold. (I just made an example shape, not a
> sheet metal part) This is a common manufacturing process in the furniture
/
> woodworking industry where we are working with a piece of wood covered
with
> a colored paper. We cut thru the wood & leave the paper, then fold the
whole
> thing together. This makes for a cleaner seam & less assemby time.
> Thanks for having a look.
>
>
add the rest in an assembly because it needed to be shown both flat and
folded.
~Larry
"Dave Hoder"
news:F82FB0D513739B07DFE1A95A4327C751@in.WebX.maYI
> The part is in CF called Miter Fold. (I just made an example shape, not a
> sheet metal part) This is a common manufacturing process in the furniture
/
> woodworking industry where we are working with a piece of wood covered
with
> a colored paper. We cut thru the wood & leave the paper, then fold the
whole
> thing together. This makes for a cleaner seam & less assemby time.
> Thanks for having a look.
>
>
